Availability Of Replacement Inner Slide For UFP A-160 Brake Actuator

Updated 09/23/2026 | Published 09/22/2026

Question:

Hello, I am looking for a replacement bolt-on inner slide for a UFP A-160 brake actuator. The original UFP part number is 19050B. I found your Dexter Model 10 Bolt-On Inner Slide with Leveler Channel, Part No. T4721700. Could you please confirm whether T4721700 can be used as a replacement for the UFP A-160 / 19050B inner slide, or whether you can supply another compatible inner slide? I only need the inner slide/channel, not the coupler. Thank you for your help. Best regards, Stefan

asked by: Stefan H

UFP160 Parts Breakdown
(click to enlarge)

Expert Reply:

Hey Stefan, thanks for reaching out. The Dexter/Titan Model 10 Inner Slide # T4721700 is not a replacement for the UFP A-160 inner slide. The # T4721700 is specifically designed for a Dexter Model 10 actuator, while your UFP A-160 uses a completely different actuator housing and slide design.

Your original UFP 19050B was the bolt-on inner slide with coupler, and Dexter’s A-160 parts breakdown confirms that number. Unfortunately, we do not carry a current replacement bare inner slide/channel for the A-160 that lets you reuse your existing coupler. So, unless you can find one old stock somewhere, your best option will be to replace the coupler entirely.

Does your trailer have disc or drum brakes?

expert reply by: Jesse M

Stefan H.

9/23/2026

4 disk 2inch ball I would weld a new coupler

Jesse M.

9/23/2026

@StefanH Gotcha. We do have a suitable replacement for that. Here is what I recommend: - Demco Hydraulic Brake Actuator - Disc - Zinc - 8" Adjustable Channel Center - 12,500 lbs # DM8103721 I'd just want to make sure the 12,500 lb capacity is sufficient for your trailer. We do have higher rated options available if needed.