Replacement Bolt-On Inner Slide with Leveler Channel for Dexter Model 10 Actuator

Video Transcript for Review of Dexter Brake Actuator - Replacement Inner Slide - T4721700

Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this replacement bolt-on inner slide with the adjustable center channel for your Dexter Model 10 actuator. Now, this part here will replace a damaged inner slide that's on your Dexter Model 10 actuator. Now, the inner slide is the part of the brake actuator that attaches to the tow vehicle, and it will slide in and out of the outer case to apply hydraulic pressure to your master cylinder, which will then apply the brakes on your trailer when stopping. Just wanted to pop up an insert to show you.

There's the Dexter Model 10 actuator. And you can see the front part. That's this part here. It's the inner slide. And again, it slides in and out of the outer case.

Now, the installation hardware install this is not included. We do sell that separate on our website. It's usually listed on this product page as a related product. This part will include one bolt-on inner slide with the adjustable center channel. And this adjustable center channel has three different mounting positions for your coupler, so that you can adjust the hight to tow your trailer level.

Now, the coupler is not included. Again, you have to buy that separately, or use one that you already have. The channel width on this is the industry standard inside width of three inches. The channel height on this is right at seven and a half inches tall. And then the distance between the adjustment holes, center to center, is gonna be right at about two inches.

But that should do it for the review on your replacement bolt-on inner slide with the adjustable center channel for the Dexter Model 10 actuators.