bing tracking image
Q & A Icon

Will Gen-Y Pin Box Work With Pullrite SuperGlide Sliding Hitch?  

Updated 09/28/2026 | Published 09/19/2026

Question:

I have a Pullrite slider hitch for my shortbed F350. Will the Gen Y shock absorbing hitch accept a hitch plate for the slider and if so, do you stock it?

0

Expert Reply:

Hey Gary!

Yes, a Gen-Y pin box like the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box # GY68GR you were looking at can be used with your PullRite SuperGlide slider. However, you will also need a compatible PullRite capture plate for the SuperGlide to function properly. The capture plate keeps the king pin from rotating inside the hitch head, which is what allows the SuperGlide to automatically slide back as you turn.

PullRite does make a Gen-Y-specific capture plate for 12" wide Gen-Y pin boxes, so we’ll want to make sure the plate matches the particular Gen-Y pin box you end up with. I can confirm the right capture plate once we confirm which pinbox you'll need.

Before purchasing the # GY68GR, you’ll also want to confirm the bolt pattern of your trailer’s current pin box. The easiest way is to get the serial number from the existing pin box and have the manufacturer confirm the pin box configuration. You can also measure it using the instructions I’ve linked below, though getting the information from the manufacturer is usually the most reliable option.

What kind of trailer do you tow with your F-350?

expert reply by:
0
Jerry B
Larry profile picture

Larry

9/27/2026

I have to give this a 4 star review for installation. None of the back holes lined up so I had to drill holes to complete As far as performance goes night and day difference in ride. It is just barely broke in just under 2000 miles but what a better ride. 5 Stars

Jerry B. profile picture
Etrailer Expert

Jerry B.

9/28/2026

@Larry Sorry to hear you had to drill for the install. I just want to confirm, did you confirm whether or not you have the Lippert 1621 or 1621HD pin box configuration before the purchase? If you didn't, that would make sense and be the reason you needed to drill, but if you do have a 1621 or 1621HD and needed to drill, that may have been a different issue.
Larry profile picture

Larry

9/28/2026

@JerryB I sent a picture of hitch id number in when I was emailing back and forth before the order.
Jerry B. profile picture
Etrailer Expert

Jerry B.

9/28/2026

@Larry I'm looking into this for you and I'm going to have someone from our Customer Service team reach out once we review what's going on there!

Expert Reply:

Hey Gary!

Yes, a Gen-Y pin box like the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box # GY68GR you were looking at can be used with your PullRite SuperGlide slider. However, you will also need a compatible PullRite capture plate for the SuperGlide to function properly. The capture plate keeps the king pin from rotating inside the hitch head, which is what allows the SuperGlide to automatically slide back as you turn.

PullRite does make a Gen-Y-specific capture plate for 12" wide Gen-Y pin boxes, so we’ll want to make sure the plate matches the particular Gen-Y pin box you end up with. I can confirm the right capture plate once we confirm which pinbox you'll need.

Before purchasing the # GY68GR, you’ll also want to confirm the bolt pattern of your trailer’s current pin box. The easiest way is to get the serial number from the existing pin box and have the manufacturer confirm the pin box configuration. You can also measure it using the instructions I’ve linked below, though getting the information from the manufacturer is usually the most reliable option.

What kind of trailer do you tow with your F-350?

expert reply by:
0
Jerry B

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>