Can An Awning Be Mounted To The T-Slots In The Fas-Top JayBar Ladder Rack?
Updated 09/23/2026 | Published 09/10/2026 >
Products Featured in This Question
Question:
Hello, I am planning a setup on a 2021 Ford F-150 with a 5.5-foot bed using the Fas-Top JayBar with two sets of side bars, and I would like to mount a TOPOAK 270-degree awning to the JayBar. I am currently considering either: 83-inch TOPOAK 270° awning — 84 × 8 × 11, 64 lbs 98-inch TOPOAK 270° awning — 102.8 × 9.4 × 11.8, 75 lbs I would also be using the awning walls and floor enclosure when camping. Before purchasing everything, I want to make sure the JayBar can safely support either of these awnings and that I mount it correctly. Could you tell me: Whether the JayBar with two sets of side bars can safely support the 64-lb or 75-lb awning mounted along one side. Whether you would recommend the 83-inch or 98-inch awning for a 2021 F-150 with the 5.5-foot bed. Which part of the JayBar you recommend mounting the awning to. Whether the T-slot channels can be used for the awning brackets or if a different mounting method is recommended. Whether additional brackets, reinforcement, or hardware would be needed. Whether there would be any clearance problems with the Fas-Top soft topper when it is raised or folded down. Whether the added walls and floor create any additional load or mounting concerns that I should consider. I would rather confirm the proper mounting method and weight limitations before purchasing the awning. Thank you for your help.
asked by: Ronnie H
Expert Reply:
Hi Ronnie!
I am going to answer your questions in order:
1. The JayBar Truck Bed Ladder Rack for Fas-Top Rails # FT53MJ with two of the Side Bars for Fas-top JayBar Truck Bed Rack - Qty 2 # FT54YJ per side will definitely support the weight of this awning. It's rated to carry up to 400 pounds and something like this will not pose any issues at all.
2. We do not carry the TOPOAK brand and I do have to admit to having no experience with the product, but from looking at pictures of the two installed, I think the 83" option will fit your truck perfectly fine. The 98" option looked to be used on long bed trucks more often and I think it would end up being a little big on yours. That said, that is just my opinion.
3. I would mount this as close to the upright post on the top crossbars as possible. It will be the strongest section of said crossbar due to all the bracketry and gussets holding everything together (see included image).
4. The T-Slots can definitely be used for the install. Since you also mentioned the Soft Topper # FT68EV (this is the Solo, so no tonneau cover), this is the way I would mount the awning. Odds are there won't be anything hanging down past the crossbar if you mount it differently, but I prefer to not leave anything to chance. With it mounted in the T-Slot, there is zero chance of anything touching the topper.
5. You will not need any other brackets to shore up the rack or anything like that. From looking at the instructions for the TOPOAK, I do not think any other hardware will be needed to get it up and running.
6. See number 4, but there really won't be any problems if you use the T-Slots
7. The floor and walls will technically add weight to the awning, but that weight will be supported by the legs of the awning, so I don't see that being a problem at all.
Hopefully that all helped, but if you come up with any other questions, just let me know. I will do my best to get you what you are looking for. ^___^
Are you going to be camping under the awning, or is it just going to be a room (for the lack of a better way to put it)?
Product Page this Question was Asked From
JayBar Truck Bed Ladder Rack Add-On for Fas-Top Rails
- Ladder Racks
- Truck Bed
- Fixed Rack
- Crossbar Rack
- Tonneau Compatible
- Over-Cab Height
- 400 lbs
- Over the Bed
- No Drilling Required
- Fas-top
more information >
Continue Researching
- Shop: Ladder Rack
- Q&A: Does EcoHitch Front Hitch # EH87SR Fit 2022 Ford F-150 Hybrid
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box



Ronnie
9/22/2026
Thank you. That helped a lot. My plan is to sleep in the truck bed under the Fas-Top Solo and use the TOPOAK 270° awning with the walls and floor as an enclosed living area. I also plan to carry one or two kayaks on top of the JayBar. Thanks again for your help. Ronnie