Complete Hub Assembly For Dexter 9,000 lb Dual Rear Wheel Axle

Updated 09/08/2026 | Published 09/03/2026

Question:

Im working on a Dexter 8 lug 9k dual rear wheel trailer. The axle tag I found said 9-44/8-288. Im needing the hub assembly with bearings and all. And also the electric brake assembly. Could you point me in the right direction as to what I need? I would like a complete kit. Preferably an etrailer brand set up. Ive used yalls stuff before and it worked out good and saved me some money.

asked by: Shane S

Expert Reply:

Hey Shane, thanks for reaching out. I see you already have the brake assemblies on order, but I wanted to make sure you have the correct hubs to go along with them. Based on your Dexter 9K axle and the 9-44/8-288 information from the axle tag, you’ll need:

Dexter Trailer Hub and Drum Assembly - 9K to 10K - 8 on 6-1/2" - Oil Bath - Non-ABS # 8-430-5UC3

This is a complete hub and drum assembly and includes the inner and outer bearings, races, oil seal, oil cap, and lug nuts. Since you mentioned wanting a complete setup rather than used parts, this is definitely the route to go.

What kind of trailer are you working on, an equipment trailer, car hauler, or something else?

expert reply by: Jesse M