Troubleshooting No Signal On Voyager Monitor

Updated 08/25/2026 | Published 08/18/2026

Question:

I have a 2007 Dutch Star bought new, garage kept when not using. It has a Voyager AOM-7694 monitor. I live in Arizona and the garage can get up to 100 degrees. The monitor is showing no signal for all three cameras. I checked the fuse and all connections. I disconnected the battery for 15 minutes and reconnected. No help. Is there something else I can check, or is it time for a new monitor? Thanks

asked by: Kenneth S

Expert Reply:

Hey Kenneth! I would check the power and ground going directly to your AOM-7694 monitor with a multimeter. I'm sure you have power based on the message on the screen, but you want to make sure you have full 12V power since low power could cause a problem.

If both check out, I would say it is time to replace the monitor with the Voyager # VOM719WP. There is no direct plug in so it will require splicing.

Where are you headed next with the Dutch Star?

expert reply by: Robin H