How Far Apart are the Adjustment Holes on the etrailer High-Low Adjustable Adapter for Tow Bars?

Updated 08/23/2026 | Published 08/16/2026

Products Featured in This Question

etrailer High-Low Adjustable Adapter for Tow Bars - 2" Hitch - 6" Rise/Drop - 10K GTW

(96)

$159.36

Question:

What are the hole dimensions apart?

asked by: Ken

Expert Reply:

Welcome back Ken! The adjustment holes are spaced 1-1/4" apart vertically on our etrailer High-Low Adjustable Adapter for Tow Bars item # e52ZV. From the center of the hitch pin hole to the adjustment holes is 8-3/4". From the center of the hitch pin hole to the hitch pin hole on the adjustable receiver is 14-1/2".

Our etrailer High-Low Adjustable Adapter item # e52ZV has a 10,000 lbs capacity and will provide up to a 6" rise or drop to ensure your tow bar is level with your flat towed vehicle's baseplates. It fits a 2" hitch receiver and comes with a tow pin and retainer clip.

What kind of vehicle are you flat towing and how much of a height adjustment do you need to be level with your motorhome? Feel free to answer this and throw in any other questions you have, where it says Add Comment.

expert reply by: Jerred H

e52ZV
(click to enlarge)

Ken

8/17/2026

Flat towing Jeep Rubicon 2023. Using a Falcon 2 towing hitch with 3.5 inches required from pin hole to back of hitch. Will hitch slide in that far?

Jerred H.

8/20/2026

@Ken It sure will Ken! I just went down and measured the 2" receiver on our etrailer High-Low Adjustable Adapter item # e52ZV. There's 4" of space behind the hitch pin hole so plenty of room for the shank on your Falcon 2 tow bar to insert.

Kenneth

8/23/2026

@JerredH Thanks for the information.