bing tracking image
Q & A Icon

Which SumoSprings Front Spring Kit Fits 2015 Sprinter 2500  

Updated 08/20/2026 | Published 08/12/2026

Question:

Hello, I am researching the SSF\-327\-47 SumoSprings for a 2015 Mercedes\-Benz Sprinter 2500 2WD\. I noticed that your website shows conflicting fitment information for the SSF\-327\-47\. On the product page, the vehicle fitment list includes: 2015 Mercedes\-Benz Sprinter 2500 However, the same page also states: “This item is not a fit for 2015 Mercedes\-Benz Sprinter 2500\.” Could you please clarify which of these is correct, and whether the SSF\-327\-47 can physically be used on a 2015 Sprinter 2500 2WD? I would also like to understand the difference between SSF\-106\-47 and SSF\-327\-47, and whether the 2\.5” spacer shown in the instructions is required for the 2WD application\. I would appreciate a clear technical explanation, as the fitment information on your website appears to be contradictory\. Thank you, Michael

0

Expert Reply:

Hey Michael, sorry about the confusion but the SumoSprings kit part # SSF-327-47 is a confirmed fit for the 2015 Mercedes Sprinter 2500 and would work great.

The # SSF-106-47 is for the 2WD models and does not include a spacer whereas the part # SSF-327-47 is for the 4WD versions which requires the spacer. Do you have a 2WD model?

expert reply by:
0
Jameson C
Michael W. profile picture

Michael W.

8/18/2026

Yes, I have a 2015 Mercedes Sprinter 2500 2WD. Thank you for clarifying. One thing is still confusing me: you said that SSF-327-47 is a confirmed fit for the 2015 Sprinter 2500 and would work great, but then you say that SSF-327-47 is for 4WD and SSF-106-47 is for 2WD. If the 327-47 physically fits the 2015 2500 2WD, what is the technical reason that it should not be used on the 2WD model? Is the difference between 106-47 and 327-47 the spring material/rate, or is there a physical difference in the spring itself? I have also seen SSF-327-47 fitted to a 907 3.5T RWD Sprinter, so I am trying to understand the actual mechanical difference. Thanks again for your help.

Jameson C. profile picture
Etrailer Expert

Jameson C.

8/19/2026

@MichaelW it's a height difference that is determined by a spacer that is the difference between the two. This is to allow the rubber spring to engage at correct time due to differences in suspension height.
Michael W. profile picture

Michael W.

8/19/2026

@JamesonC That makes sense, thank you. So, if the spacer determines the engagement height, would installing the SSF-327-47 without the 2.5” spacer place the spring at approximately the correct engagement height for a 2WD Sprinter? In other words, is the main reason for the spacer on the 327-47 simply to compensate for the higher 4WD suspension? I am not asking whether it is the officially recommended part number — I am specifically trying to understand the mechanical/installation difference.
Jameson C. profile picture
Etrailer Expert

Jameson C.

8/20/2026

@MichaelW Yes you are completely correct. If you didn't have the spacer in the 4WD kit it would fit the 2WD kit.
Eric S. profile picture

Eric S.

8/19/2026

Jameson asked me to share my experience with the SumoSprings. I installed them on my 2023 Winnebago View (Sprinter 3500) to correct the passenger side lean. They didn't correct the lean but did firm up the ride and reduce the side to side rocking a lot. Eventually decided the ride was too firm for the motorhome (rattles every bump) but do know they would be great for heavy loaded cargo Sprinter. Installation and removal is not too difficult. Front easy, rear takes some muscle.

Jameson C. profile picture
Etrailer Expert

Jameson C.

8/19/2026

@EricS honest feedback that we appreciate!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>