Looking For Dexter Part K71-2H Or Equivalent
Updated 08/16/2026 | Published 08/08/2026
Products Featured in This Question
Question:
Looking for part K71-2H Dexter axel
asked by: Chuck S
Expert Reply:
Hey Chuck, thanks for reaching out. That part number comes back as a Dexter disc brake kit for a 3,500 lb axle. While we don't carry that exact part number, we do have an equivalent. Here is what I recommend:
- Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # T2HRCM10DAC
This comes with 5 lug hub/rotors, calipers, brackets and brake pads. Everything you need to replace the brakes on a 3,500 lb axle. If you need new bearings, we can provide those also with part # BK2-100 which is a complete bearing kit.
What kind of trailer are you working on?
(click to enlarge)
Product Page this Question was Asked From
Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Availability of Replacement Parts for Atwood 85736 Brake Actuator
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed To Add Disc Brakes To A 2002 EZ Loader Trailer With No Brakes
- Q&A: Brake Upgrade Reccomendation For My UFP DB-42 Oil Bath Brakes
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Replacement Disc Brakes for 2018 Load Rite Boat Trailer With TDE 660
- Article: Most Popular Wheel Bearings
- Q&A: EOH Actuator and Brake Lines For Nucamp Tag XL Boondock Adding Disc Brakes
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
Leo
8/16/2026
If i do say myself that this setup definitely works. I forgot to put the pin in and couldn't back up. Definitely slows down when brakes are applied. My trailer is almost brand new, brakes, hubs, 2 axles, new hydraulic piston braking system AND new brake lines.