Looking For Replacement For TDE Idler Hub D4420 44871
Updated 08/03/2026 | Published 08/01/2026
Question:
Please help I have a TDE idler hub that uses the same inner and outer bearing L68149 they ride on a 1.375 straight spindle. The dust cap is a 2.44 diameter. I am using kodiak 10 inch slip on rotors , do you have a replacement? The hub has some markings on it ,the front side has the number TMW 101014-1, the back side has D4420 and 44871 please let me know if you have something that will match
asked by: Allen c
Expert Reply:
Hello again Allen. I wasn't able to find any references for those part numbers. Must be an older TDE number, but I think you are on the right track with the Dexter Trailer Idler Hub Assembly # DX45BR. This uses the L68149 inner and outer bearings, 5 on 4-1/2" bolt pattern and it'll work with the 10" Kodiak rotors.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 4,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L68149
- Marine Grade
- For 4200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Best Way To Identify Idler Hubs On 18' Utility Trailer
- Q&A: Where Should Kodiak Disc Brake Calipers Be Mounted On A Trailer Axle?
- Shop: DeeMaxx Braided Stainless Steel Hydraulic Brake Line - 3/16" Female x 90-Degree Male - 18"
- Search Results: triple lip seal
- Shop: Grease Seal Kit- Triple Lip - Inner Diameter 1.719" - Outer Diameter: 2.565" - Qty 2
- Shop: Trailer Idler Hub Assembly for 4,200-lb Axles - 5 on 4-1/2 - Galvanized
- Video: All You Need to Know About the Dexter Brake Line Tee with Mounting Bracket
- Search Results: idler hubs
- Shop: Lippert Trailer Idler Hub Kit for 2,200-lb Axles - 8" to 12" Wheels - 5 on 4-1/2"
- Shop: Kodiak Elbow Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares
- Q&A: Solution for Needing Rebuild Kit for Tie Down 46304
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Threaded - Galvanized
- Q&A: Trailer Hydraulic Brake Line Tee Fittings
- Q&A: What Brake Kit is the Best Replacement for My Tie-Down Engineering Caliper 46304 on Vortex Hubs?
- Video: Kodiak Disc Brake Caliper Review
- Q&A: Will the Kodiak 225 Calipers Be a Direct Replacement for a TDE 46304 Caliper
- Q&A: What Direction Should Disc Brake Calipers Face
- Search Results: trailer hubs and drums
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Search Results: trailer brakes
- Shop: Brake Controller
- Search Results: trailer leaf springs
- Shop: Suspension Enhancement
- Search Results: trailer breakaway kit
- Shop: Gooseneck Hitch
- Shop: Fifth Wheel Hitch