Can The Race Ramps HD Flatbed Tow Ramps RR75JE Be Used On A Featherlite Open Trailer?

Updated 08/06/2026 | Published 08/01/2026

Question:

Can this Part Number: RR75JE be used with the loading ramps on a Featherlite open trailer? It says these are for a roll back flatbed trailer.

asked by: Stan H

Expert Reply:

Hey Stan, thanks for reaching out. Yes, the Race Ramps HD Flatbed Tow Ramps # RR75JE can be used with the loading ramps on your Featherlite open trailer as long as the dimensions line up. Even though Race Ramps markets them for rollback flatbeds, their job is simply to reduce the transition angle between the ground and your trailer ramps. They don't care whether those ramps are on a rollback or a trailer.

The two measurements to check are the height from the ground to the bottom of your loading ramps and the width of your ramps. The # RR75JE has a 3-1/4" notch height, a 5" notch length, and is 10" wide. If your Featherlite's loading ramps fit within those dimensions, they'll work just fine and help prevent low-clearance vehicles from scraping during loading.

What do you usually load on your Featherlite? A car, UTV, tractor, or something else?

expert reply by: Jesse M

Race Ramps HD Flatbed Tow Ramps - 4-1/2" Tall - 5.2 Degree - 42" Long - 10" W - Qty 2
(click to enlarge)

Stan H.

8/5/2026

I haul vintage MG race cars on my trailer, a 1959 MGA and a 1965 MGB.

Jesse M.

8/5/2026

@StanH Nice! Those are some sweet rides! I'm sure anything you can do to decrease that approach angle will help.

Bruce

8/6/2026

I use them to load my Formula Continental racecar into an Interstate enclosed trailer and also to get lowered cars onto my 4 post lift. They work great for both situations