Recommended Double-Acting 10K Hydraulic Trailer Jack that Can Be Welded Onto a Trailer
Updated 07/18/2026 | Published 07/15/2026 >
Products Featured in This Question
Question:
Is your stillwell atlas IV 10k part st23fr weld on hydraulic jack double acting? If not do you offer a weld on that is double acting thanks
asked by: Chad
Expert Reply:
Unfortunately, it is not Chad but I have one that is. The Atlas IV Double-Acting Hydraulic Trailer Jack item # ST73FR would be the correct one. It comes with the universal bolt on bracket but the entire jack casing is made of steel so it can definitely be welded to your trailer's frame. You can remove that mounting bracket if it's in the way or just leave it there and then all you'll need to do is scrap off some of the finish when you weld it to your trailer.
The Atlas IV Double-Acting Hydraulic Trailer Jack item # ST73FR has a 10,000 lbs capacity, is 34" tall overall when retracted, and provides up to 26" of total travel. We also have this double-acting jack in a kit that includes the hydraulic lines and fittings. I've listed them below by the length of the hose kits:
Atlas IV Double-Acting 10K Hydraulic Trailer Jack w/ Connection Kit for Dump Trailer
60" item # ST84VR
48" item # ST74VR
39" item # ST64VR
What kind of trailer do you have and what do you haul with it?
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Atlas IV Double-Acting Hydraulic Trailer Jack - 26" Lift - 10,000 lbs - Bolt On
- Trailer Jack
- 5th Wheel Trailer
- Dump Trailer
- Enclosed Trailer
- Gooseneck Trailer
- Side-Mount Jacks
- 9001 - 10000 lbs
- Hydraulic Jack
- 26 Inch Lift
- Bolt-On
- With Rectangle Foot
- Stillwell
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How Does The Atlas IV Hydraulic Trailer Jack ST23FR Retract Completely?
- Q&A: Electric Tongue Jack for 7,000 lb Cargo Trailer
- Q&A: Replacement Front Mounted Trailer Jack For Cattle Trailer
- Article: Trailer Jacks
- Q&A: Mounting Bolt Dimensions of the Hydraulic Jack w/ Integrated Counter Balance Valve e23VV
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Why Would Trailer Axle Shackles Flip Wrong Direction When Trailer is Unloaded
- Q&A: Compatibility of Lubrimatic Grease with Other Grease Types
- Q&A: Bolt Torque Specification for Mounting a 12 Inch Brake Assembly
- Article: How to Choose the Right Trailer Hitch Class
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: 5 Things to Know About Weight Distribution Hitches



