Grease Cap for 2017 K-Z Sportsmen 260BHLE
Updated 07/16/2026 | Published 07/14/2026
Question:
Would you be able to tell me what size wheel bearing dust cover i would need to order for my 2017 K-Z Sportsmen 260BHLE Thanks
asked by: Rhett T
0
Expert Reply:
Hey Rhett! It looks like your 2017 K-Z Sportsmen 260BHLE has 3,500 lb EZ-Lube axles. Assuming that is correct, you need the EZ Lube Grease Caps with 1.99" OD # DX69HR. I do recommend verifying the axle tag, or measuring the hub bore just to be sure.
Where are you headed next with your Sportsmen?
expert reply by:
Robin H
0
EZ Lube Grease Caps
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- Dexter
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Leaf Spring Replacement for Flat Trailer with 3.5K Axle
- Q&A: Replacement Grease Cap Plug for EZ Lube Grease Cap
- Q&A: What Replacement Bearings Do I Need for my Camper With Dexter 9163962 Axles
- Q&A: Replacement Grease Caps for 3,500 lb Axle
- Q&A: Looking for Replacement Bearing Kit and Grease Cap Kit for 2020 Jayco with 3,500 lb Axles
- Q&A: Replacement Disc Brakes for Trailer With Dexter Disc Brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
Rhett T.
7/16/2026
Hello Robin and thankyou very much. There is a special tool that is used to install this dust cap correctly? If you were able to provide that part number link we will be fully ready to get started on our journey to the upper Michigan Peninsula! thanks again Rhett Tucker