bing tracking image
Q & A Icon

What Trailer Hitch and Wiring Will Work for a 2016 Freightliner 2500 with Step Bumper?  

Updated 07/15/2026 | Published 07/13/2026

Question:

Hello, Im looking for help finding the right trailer hitch for my van: - Vehicle: 2016 Freightliner Sprinter 2500 - It has a step in the back about 8 inches wide I would also need the appropriate wiring that will connect the blinker lights and brake lights to the trailer. Id appreciate any guidance to find the right hitch and wiring. Thank you so much!

0

Expert Reply:

Hi Paula,

For you 2016 Freightliner 2500 with step bumper, I suggest using the etrailer Custom Trailer Hitch with 2" Receiver part # e82TR. It is a 2" trailer hitch receiver that will fit both the 144" and 170" wheelbase, however, it will NOT fit passenger vans or vehicles with a 30 3/8" frame measured from outside frame to outside frame. It is a no drill installation and is designed to sit at the edge of the step bumper, so you won't need an extension to get past the step.

For wiring, you'll need the Curt Powered Taillight Converter with 4-way Flat part # C59496, it's a universal wiring harness so it will require splicing into the vehicle's wiring. To add a 7-way, you can use the Universal Brake Controller Installation Kit part # ETBC7. The ETBC7 includes a 7 and 4-way connector that your 4-way from the wiring harness will plug into and 10-gauge wiring to run the brake signal and power back to the 7-way.

What are you planning on towing with your Freightliner 2500?

expert reply by:
0
Claire H
e82TR Installed
e82TR Installed
(click to enlarge)

Expert Reply:

Hi Paula,

For you 2016 Freightliner 2500 with step bumper, I suggest using the etrailer Custom Trailer Hitch with 2" Receiver part # e82TR. It is a 2" trailer hitch receiver that will fit both the 144" and 170" wheelbase, however, it will NOT fit passenger vans or vehicles with a 30 3/8" frame measured from outside frame to outside frame. It is a no drill installation and is designed to sit at the edge of the step bumper, so you won't need an extension to get past the step.

For wiring, you'll need the Curt Powered Taillight Converter with 4-way Flat part # C59496, it's a universal wiring harness so it will require splicing into the vehicle's wiring. To add a 7-way, you can use the Universal Brake Controller Installation Kit part # ETBC7. The ETBC7 includes a 7 and 4-way connector that your 4-way from the wiring harness will plug into and 10-gauge wiring to run the brake signal and power back to the 7-way.

What are you planning on towing with your Freightliner 2500?

expert reply by:
0
Claire H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>