Replacement Brakes for Horse Trailer With 10 x 2-1/4 Brake Assemblies
Updated 07/08/2026 | Published 07/03/2026
Question:
I have an old horse trailer with dexter electric brakes on the rear wheels only. The outside measures about 10 inches wide. The depth is about 2 1/4. The magnet is gone.
asked by: Lorri B
0
Expert Reply:
Hey Lorri! The Dexter Nev-R-Adjust Electric Trailer Brakes # 23-468-469 you were looking at match those measurements. As long as you have a 4-bolt brake flange on the axle with mounting holes 2-7/8" apart these will work as a replacement.
Where do you typically take your horses?
expert reply by:
Robin H
0
Dexter Nev-R-Adjust
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Troubleshooting Weak Braking After Installing New Dexter Electric Brakes on Trailer
- Q&A: When To Replace Your Brake And Hub/Drum Assemblies And How To Handle Discoloration On The Spindle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure Your Trailer Wheel Bolt Pattern