bing tracking image
Q & A Icon

Replacement Leaf Springs for 2022 Forest River Nitro XLR with 7000 lbs Axles  

Updated 07/16/2026 | Published 06/28/2026

Question:

I have. A 2022 forest river nitro XLR with Dexter 7000lb axles. I’m looking to replace the leaf springs but unsure what ones to order.

0

Expert Reply:

Hey Brandon,

Leaf springs are not trailer specific, so we would have to get some measurements based on your current setup. I've linked below our article on how to measure the old leaf springs and then that will help us to get you the correct replacement. Could you reply with your dimensions? From there, I'll get you some recommendations!

expert reply by:
0
Jerry B
Mike profile picture

Mike

7/3/2026

We broke stock leaf spring on our 2023 Alliance Valor 42v13. We changed all six of them to the DX74XR 8,000lb. Etrailer shipped them to an Elks Lodge and we changed them in parking lot in about 4 hours. Order new wet bolts as well! Have had them on for almost 1.5yrs and traveled over 30,000 miles with them no issues. We did also add sumo spring helpers about 8 months ago to help as well. We full time in our camper and would recommend the DX74XR.

Jerry B. profile picture
Etrailer Expert

Jerry B.

7/6/2026

@Mike I'm glad to hear your leaf springs are holding up! I'd love to hear more about your travels.
Harvey W. profile picture

Harvey W.

7/3/2026

E-trailer is the way to go with specific springs in guesting. The work well , with over20000 miles since install, still performing.

Jerry B. profile picture
Etrailer Expert

Jerry B.

7/6/2026

@HarveyW Thanks for your reply! We're glad to hear these are working out for you. Where are you planning on taking your camper next?
Brian C. profile picture

Brian C.

7/4/2026

Be sure to check the leaf spring center bolts are installed the correct direction. The bolt head always goes against the axle pad. Installed the wrong direction will cause the spring to not fully seat on the axle pad. Simply remove the bolt, insert from the opposite direction and retorque to spec.

Jerry B. profile picture
Etrailer Expert

Jerry B.

7/6/2026

@BrianC Great idea! Did you have to learn the hard way or were you warned? Haha
Brian C. profile picture

Brian C.

7/6/2026

I had to learn the hard way! Not fun when that bolt breaks and the axle slides back on the spring.
Jerry B. profile picture
Etrailer Expert

Jerry B.

7/6/2026

@BrianC Absolutely. Thanks for sharing your expertise. I'm sure our neighbors will appreciate that!
Stuart B. profile picture

Stuart B.

7/8/2026

The 4000lb springs worked great the original springs were flat Etrailer set me up with no problems

Jerry B. profile picture
Etrailer Expert

Jerry B.

7/9/2026

@StuartB That's great to hear, I'm glad you were taken care of. What kind of trailer did you install the springs on?
Stuart profile picture

Stuart

7/16/2026

@JerryB 2020 keystone raptor 351
Jerry B. profile picture
Etrailer Expert

Jerry B.

7/16/2026

@Stuart That's a great trailer! Any fun trips coming up? I'm headed to the lake this weekend and looking forward to getting out in the sun.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>