bing tracking image
Q & A Icon

Identifying Longer MC4 Connection On Go Power Entry Plate  

Updated 07/22/2026 | Published 06/22/2026

Question:

I have what I assume is an older version of this entry plate without the supports? My negative side cable has a long connector of some sort that I can’t identify and when this connection flexes it causes the connection from the panel to the controller to fail. Can you help identify this longer connector? See attached image

0
Entry Plate
Entry Plate
(click to enlarge)

Expert Reply:

Hey Mark! That looks like an in-line diode on the MC4 connector. Those are typically installed on the positive side, but I can't think of anything else that matches that appearance. It's not a standard part of the Go Power entry plate, so it was added by whoever installed it.

Unless you have a much older solar setup that specifically requires a diode, modern solar charge controllers prevent backfeeding so the diode wouldn't be necessary. It should be safe to remove it and replace it with a standard MC4 connector so you don't have the issues with the flexing.

What kind of trailer are you working on?

expert reply by:
0
Robin H
Mark V. profile picture

Mark V.

6/25/2026

Robin, My Camper is a 2025 KZ Ridgeway 31RL 5th wheel; After I posted this comment I continued to dig around, I also came across the diodes but seeing as they typically go on the positive side I dismissed those. I believe this is actually an in-line fuse? Like this one https://www.etrailer.com/Accessories-and-Parts/Rich-Solar/RS44VR.html ?

Robin H. profile picture
Etrailer Expert

Robin H.

7/22/2026

@MarkV that may be true as well. Either way this is on a 2025 so whatever systems you have installed should be fine if you remove it. If you really want to make sure, give the solar controller manufacturer a call and see what they say about it.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>