Parts Needed To Add The Redarc Tow-Pro Liberty Brake Controller To A 2025 Ford F-150
Updated 06/22/2026 | Published 06/17/2026
Products Featured in This Question
Question:
Part Number: RED67CR says it fits 2025 ford f150, install info does not list this vehicle. Are any additional parts requested for the installation?
asked by: Cla c
Expert Reply:
Hi Cla!
The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional # RED67CR will indeed fit your 2025 Ford F-150. You just have to make sure you have the factory 7-Way on the back. As long as you do, you will be able to plug this right into a port under your dash. No other parts will be needed.
If you do not have the 7-Way, you will need to grab the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. This will piggyback off a 4-Flat (if you don't have that, you will need the Curt # C58044). This will need the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR. It's the exact same controller, just with the universal pigtail.
What kind of trailer are you going to be towing?
Product Page this Question was Asked From
Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Plug-In
- Dash-Mounted Knob
- Behind-Dash
- Up to 2 Axles
- Indicator Lights
- Single Trailer Only
- Redarc
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Availability Of Brake Controller For Factory EBC Plug On 2025 Ford Ranger With Factory Tow Package
- Q&A: Plug And Play Brake Controller For A 2023 Ford Explorer XLT With Towing Package
- Q&A: 2025 Ford Ranger Brake Controller Install Redarc Tow-Pro Liberty Setup
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Off-Road Brake Controller for a 2024 Ford F-150
- Q&A: Recommended Plug and Play Brake Controller for a 2024 Ford Ranger w/ the Factory Towing Package
- Q&A: Recommended Brake Controller w/a Custom Installation Harness for a 2026 Ford F-150 w/a Factory 7-Way
- Q&A: Wiring Adapter Needed to Connect Redarc Liberty Tow Pro Brake Controller on a 2022 Ford F-150
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
Chris H.
6/20/2026
I installed the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness in my 2025 Ford Ranger. That vehicle had the seven pin port with the tow package. The custom harness connected directly to a light gray four pin plug which was heavily taped to the wires to the left of the driver pedals above the left kick panel. It took a little bit of digging around to find the connector and untape it from the existing wires, but once found it was very easy to connect and install the Liberty Brake Controller. Good luck and I hope this helps.