Can DeeMaxx Caliper Brackets Be Used With Kodiak Kodaguard Calipers?
Updated 05/21/2026 | Published 05/18/2026
Products Featured in This Question
Question:
Im replacing my disc brakes rotors, calipers and pads on my 2017 Contenental Tandem Axles Boat Trailer with 6,000 lb. axles.... Question: Can I used the caliper mounting brackets that are from DeeMaxx to mount these replacement Kodiak Kodaguard Calipers with the Kodiak Gal-Dex Slip on cap style 12inch rotors? Any information would be helpful? Thanks, Jim
asked by: Jim P
Expert Reply:
Hey Jim, thanks for reaching out. No, you cannot use DeeMaxx brackets with Kodiak calipers. It's never a good idea to mix and match brands with disc brake parts. The brackets and calipers are similar between brands but not identical. Even if the dimensions of either part are off by a hair, it will put stuff out of alignment. A lot of times what we see when mixing brackets and calipers is the pads dragging on the rotor. All it takes is a very slight difference to throw things off. You will need to use the matching Kodiak caliper brackets if you intend to use the Kodiak Kodaguard Calipers.
The brackets come with the disc brake kits, but if you need the brackets by themselves we have those as part # KCMB12D. But again, if you get a full kit like the # K2R526DKG you were looking at, that will come with matched calipers and brackets.
Was there a particular reason you were wanting to use the DeeMaxx brackets?
(click to enlarge)
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and KodaGuard - 5,200 to 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Rotor
- 5200 lbs Axle
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Kodiak
more information >
Continue Researching
- Q&A: What Is The Difference Between SumoSprings SSR-307-47 And SS67UJ
- Q&A: Is There Lock that Comes with etrailer Spare Tire Mount for Hitch # e98ZR
- Q&A: Recommended 5,200 lbs Timbren Axle-Less System
- Q&A: Does Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera Come with CHMSL Camera
- Q&A: Idler Hub for Use on Tie Down Axle Part 46648 from Venture Trailer
- Q&A: Recommended Brake Controller and Wiring Harness to Replace a Factory Controller in a 2024 Silverado
- Q&A: Size of Inlet and Discharge Threading on Lippert Flow Max RV Water Pump
- Article: How to Bleed Your Trailer Surge Brakes
- Article: The Best Boat Bumpers
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: What Jeeps Can Be Flat Towed?
- Article: How to Tell the Weight Rating of a Trailer Axle
Sam Y.
5/21/2026
I would agree 100% with Jim but also add as a purchaser of this setup it’s all plug and play and time is money , personally I would rather be fishing then changing my trailer brakes so if I can install this Kodiak setup and get it done quickly then it’s a win win! Good luck Sam