Recommended Lippert Manual Pull-Out Step for RVs
Updated 05/12/2026 | Published 05/09/2026
Products Featured in This Question
Question:
Wanting to know if the slippery 2 step, RV steps will be able to replace the current steps on my 2019 Open Range 26bh? The mounting used on my current steps looks different.
asked by: Mike W
Expert Reply:
Hey Mike. I don't have anyway of knowing what size steps came on your 2019 Open Range 26bh or how wide the mounting bracket that attaches them is. What I can do is give you some measurements of the Lippert Manual Pull-Out Step item # LC432682 to compare them to your current setup.
The Manual Pull-Out Step item # LC432682 fit brackets measuring 25-1/2" wide x 9-3/4" tall x 12" deep. They're designed for entry heights that are 21-1/2" - 24-1/2".
How wide are your steps mounting brackets and do you see any part numbers on your steps?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
Product Page this Question was Asked From
Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 25-1/2 Inch Wide
- 2 Steps
- 7 Inch Drop/Rise
- Steel
- Lippert
more information >
Continue Researching
- Shop: MaxxAir MaxxFan Rooftop Vent w/ Pivoting Fan - 4 Speed - Manual Lift - Smoke Lid
- Q&A: Can I Replace a Kwikee 32 Series Step w/ a Manual Pull Out Step?
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: 2 Step Pull Out Recommendation for a 2016 Wildwood Forest River Camper
- Q&A: Can 2-Step Lippert Steps Replace a Single Step on a 2017 Winnie 170S
- Q&A: Replacement 2-Step RV Steps For A 2017 Forest River Wildwood 171RBXL Travel Trailer
- Q&A: Can Trailer Valet Be Used with Driver instead of Drill
- Q&A: How Does Safe-T-Plus Steering Stabilizer For E350 E450 Compare To Roadmaster Reflex?
- Q&A: Mounting Hole Spacing of Lippert Manual Step
- Article: The Best Electric Trailer Jacks of 2025
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Beginner's Guide to RV Awnings: How to Open, Close, and Maintain Your Awning
- Article: Trailer Lighting Requirements
- Article: Which RV Propane Tank Size Do I Need?
- Article: How to Measure for Motorhome Steps
Dan S.
5/12/2026
The failed OEM stairs on my 2008 Jayco 24RKS had extender brackets riveted to both sides. I drilled out the rivets and bolted the plates to the replacement LC432682 using low-profile hardened torx bolts and nuts. If you have a big enough riveting tool then they should be riveted on. Typical hex bolts would not allow clearance for the steps to be retracted or deployed. Once the salvaged brackets were reused the steps became a bolt-in replacement on the Jayco trailer. Unfortunately I cannot speak for Open Range models especially as design may evolve over 11 years.