Can Small Coin Pattern Vinyl Flooring Be Cut With Hole Saw For D-Ring Installation

Updated 04/20/2026 | Published 04/15/2026

Question:

Can I use a hole saw to install D-Rings after coin flooring is installed in the trailer?

asked by: Randy W

Expert Reply:

Hi Randy; you can install D-rings after putting down the Small Coin Pattern Vinyl Flooring # TS97FR in your trailer. If you're going to use the hole saw just make sure you drill slow and steady so you don't tear or melt the floor. That top layer can grab a bit if you go too fast.

If it were me, I would probably cut through the flooring with a utility knife or something similar first to get a clean outline. Then run the hole saw through the wood underneath.

What kind of setup do you have?

expert reply by: Robin H