Replacement Suspension Hardware for EZ Loader Boat Trailer
Updated 04/21/2026 | Published 04/15/2026
Products Featured in This Question
Question:
Hello, I'm trying to find the hardwares to replace the leaf springs on my ezloader boat trailer. Is there a kit or anyway of finding the right parts: bolts, sleeves, and ubolts/plates? 3000 trailer capacity. Thank you!
asked by: Eddie X
Expert Reply:
Hey Eddie! To find the right parts we will need some more information. Does your 3k axle have a 2-3/8" diameter? Assuming it does, you can use the CE Smith U-Bolt Kit # CE23002.
How long are your shackle straps center hole to center hole? If they measure 3-1/8" you can use the Dexter Single Axle Standard Duty Suspension Kit # K71-403-00. You can also upgrade with the Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers # K71-358-00. This comes with wet bolts, steel bushings, and 1/2" thick shackle straps.
If you have different measurements, or tandem axles, let me know in the comments below.
Where are you headed next with your boat once you get your trailer up and running again?
(click to enlarge)
Product Page this Question was Asked From
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Q&A: Trailer Tires Wearing On the Inside of the Tread
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Search Results: black caulk
- Search Results: dexter trailer axles
- Search Results: dexter 3000 lb axle
- Q&A: Trailer Sways Above 40-50 Miles Per Hour
- Search Results: goodyear endurance
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: CE Smith Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - Galvanized
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Search Results: trailer wiring
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Video: How To Choose Camper Leaf Springs
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Shop: Suspension Enhancement
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Shop: Fifth Wheel Hitch
on Trailer Suspension Parts
Matt R.
4/21/2026
Eddie X - I recently used the U-bolt kit for a 3500# axle. These parts are not complicated. When I ordered my parts, I looked at what was existing on the trailer and made sure that the u-bolts matched the axle diameter and overall length. Also, made sure the plates matched as well. When selecting parts, scroll down to the info section on the parts. etrailer does a really good job of providing parts specifications and dimensions.