Will etrailer Ramp Set # e47XV Work for Kubota L2025

Question

Question:

I have a kabota tractor L2025 Will the ramps hold the weight

asked by: Rodney M

0

Expert Reply:

Hey Rodney, yes the etrailer ramp set part # e47XV will work for your Kubota L2025 as the ramps are rated for up to 6,000 lb and your tractor only weighs 2,800 lb. What kind of trailer do you have and where do you usually have to transport your tractor to?

expert reply by: Jameson C

0

Ramp
(click to enlarge)

Rodney M.

3/31/2026

I bought the ramps. Thank you for your response

Jameson C.

3/31/2026

@RodneyM awesome! Glad to help!

Answer 1

That’s a great question, Angela - and you’re definitely not alone there. The easiest way is to measure the clear deck width at the very back of the trailer, where the ramps will mount, making sure there aren’t side rails or stake pockets in the way.…

view full answer...

Answer 2

Yep, that flexibility is built right in, Chris. The ramps slide side-to-side along the index bars on all RapidRamps kits, whether you’re looking at the 5' options (#e37XV for 5 - 6-1/2' wide trailers or #e97XV for over 6-1/2' wide) or the…

view full answer...

Answer 3

Mark, that’s exactly the problem RapidRamps were designed to fix. And I understand the frustration as I currently use 3 foot long heavy angle-iron steel ramps on my Big Tex car hauler. I plan to upgrade to one of these kits. Once you install a…

view full answer...

Answer 4

Howdy Jason, for trailers over 6-1/2 feet wide, you’ll want either #e97XV 5 foot ramps or #e67XV 6 foot ramps. Both bolt directly to a wood trailer deck and include everything needed for installation. Between the two, ramp length is the deciding…

view full answer...

Answer 5

Hi Yogesh, thanks for sending over those measurements and photos, that really helps and I completely understand wanting to get rid of those heavy steel ramps and make loading quicker and smoother Based on your trailer being 6 feet inside to inside,…

view full answer...

Answer 6

Hey Kevin! The lip on either side of the etrailer RapidRamps #e47XV is approximately 1.875" tall. These 6' long ramps are designed for trailers over 6-1/2' wide and can hold up to 6,000 lbs per pair (3,000 lbs per ramp). What will you be…

view full answer...

Answer 7

Yes, they can, Chris. With both 6 foot RapidRamp kits #e47XV and #e67XV, the ramps slide side-to-side along the index bars so you can line them up with different tire widths. Once lifted back in the upright position, they latch in place, and you can…

view full answer...

Answer 8

Hey there Daniel - it really depends on your trailer height and what you’re loading. The 6' RapidRamps kits (part numbers #e47XV for 5–6-1/2' wide trailers and #e67XV for trailers over 6-1/2' wide) give you a gentler approach angle, which…

view full answer...

Will etrailer Ramp Set # e47XV Work for Kubota L2025

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching