7-Way and Brake Controller Recommendation for 2026 Subaru Outback Wilderness
Updated 03/05/2026 | Published 03/02/2026
Products Featured in This Question
Question:
I have the 2026 Subaru wilderness, I would like to install the new hitch with the wiring harness. I would like the wiring harness to have a seven pin connector as the trailer that I pulled has brakes. It is a small fiberglass camper and only weighs about 13 to 1400 pounds but I would still like to use the brakes that are on the trailer. Do you have an option for adding the seven pin connector and the brake controller. Thank you very much
asked by: Thomas A
Expert Reply:
Hey Thomas, we have the Curt trailer wiring harness part # C56040 that is a fit for your 2026 Subaru Crosstrek Wilderness and would be what you'd need to start with for trailer wiring. This is a 4-way so to convert it to a 7-way and wire up a brake controller you would then need the part # ETBC7.
Then for a brake controller the Redarc Tow Pro Liberty part # RED52VR is my favorite option to recommend. This only puts a small knob on the dash of your vehicle and it works really well.
(click to enlarge)
Product Page this Question was Asked From
EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2"
- Trailer Hitch
- For Towing
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Completely Hidden
- EcoHitch
more information >
Continue Researching
- Q&A: Longer Ball Mount Recommendation with 1 inch Rise
- Shop: Brake Controller
- Video: A Closer Look at the Trimax Universal Anti-Rattle Clamp for Class III and IV Trailer Hitches
- Video: B&W Anti-Rattle Clamp Review - Quieter, Smoother Towing
- Video: A Closer Look at the Curt 2" Hitch Ball with a 1" Diameter by 2-1/4" Long Shank
- Video: Installing the EcoHitch Hidden Trailer Hitch Receiver on a 2025 Subaru Forester
- Video: B and W Anti-Rattle Clamp for 2" Hitch Receivers Spec Review
- Video: All You Need to Know About the Curt Ball Mount for 2" Hitches
- Shop: Curt Anti-Rattle Hitch Clamp for 2" Hitches
- Shop: 2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Shop: Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
- Shop: Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8,000 lbs - Aluminum
- Shop: BAJA Collection Ball Mount w/ 2" Ball and Hitch Pin - 2" Drop - 3/4" Rise - 5K
- Shop: etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel
- Shop: Trimax Universal Anti-Rattle Clamp for Class III and IV Trailer Hitches
- Video: Detailed Breakdown of the Brophy Ball Mount
- Shop: Trailer Wiring
- Q&A: Recommended Hitch for a 2026 Subaru Crosstrek Wilderness
- Q&A: Will Installation of EcoHitch Stealth on 2025 Crosstrek Require Enlarging Holes in Frame
- Q&A: Does EcoHitch Stealth Hitch # EH57CR Fit 2024 Subaru Crosstrek Wilderness Edition
- Q&A: Will I Need To Enlarge Holes To Install A Hitch On A 2024 Subaru Crosstrek Limited
- Q&A: How to Avoid Pushing Hitch Mounting Bolts Back Into Frame During Hitch Installation
- Q&A: Availability of Curt Hitch 13634 for 2025 Subaru Crosstrek Wilderness
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Trailer Hitch Installation Tips
- Article: Rooftop Cargo Carriers
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
on Trailer Hitch
Thomas D.
3/5/2026
This looks great. Now I have to digest it and see if I dare try to do this by myself. I certainly like the way it looks. Thanks again Tom.