What Timbren Axle-Less Set Up Do I Need for my 2024 Nucamp Tab 320s Boondock
Updated 02/26/2026 | Published 02/20/2026
Products Featured in This Question
Question:
I would like help ing the correct timbren axle-less set up for my 2024 nucamp tabs 320s boondock.this is the information off of my current axle. Dexter 11154592 10 3000lbs HF=65.63 OB=49.18 1OUT 5 16 24 S3 L1
asked by: Michael M
Expert Reply:
Hey, Michael.
Thanks for all the information. I was able to reach out to Dexter with the information you gave me and get all the specs I need to find the right Timbren kit for you.
If you're wanting a straight spindle, then kit part # ASR3500S05 is exactly what you need. This would pretty much be an equal swap out so to say. However, Timbren also offers their kits with a 4" lift. If that's something of interested, especially if you want more ground clearance, then get part # ASR3500S06 instead.
For the hub/drums get part # AKHD-545-35-EZ-K and for the brakes get part # TRU36FR. The hub/drum assemblies are sold as individuals so just make sure to get two of them. Both of these parts will work on either of the Timbren kits I've linked above.
What kind of camping trips do you have planned with your Nucamp?
(click to enlarge)
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Q&A: What Upgraded Equalizer Can I Use to Replace My 5 5/8" Long Standard Equalizer?
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: How do I Improve Ride Comfort When Towing a 39' Travel Trailer with a 2025 F-350?
- Q&A: Replacement 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Q&A: Replacement 2,500 lbs - 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Q&A: Is There MORryde CRE3000 that Could Fit Wheelbase of 31 inches
- Q&A: 3 Camera Multiplexer Recommendation for RV with 3 Cameras
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
Michael M.
2/26/2026
I can't upload the photo but with the way my current axle sits the center of the hub is just above the frame of the vehicle. The kit part # ASR3500S05 "no drop" would actually be a lift in my situation. Are there any charts that show what the expected "sag" to expect once there is load on these axles?