Which MORryde X-Factor Crossmember Fits 2023 Keystone Montana 3901RK Legacy?
Updated 01/30/2026 | Published 01/25/2026 >
Products Featured in This Question
Question:
Which MORryde X-Factor Crossmember Fits 2023 Keystone Montana 3901RK Legacy? I know some of the suspension is different from the base 3901RK. Thanks
asked by: Markl
Expert Reply:
Hi Mark, thanks for reaching out. For the 2023 Keystone Montana 3901RK Legacy, the correct fit is the MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR. Even with the Legacy suspension, the hanger layout is the same, so you can use the same X-Factor on all three hanger locations.
The one thing I’d recommend before installing is taking a quick look underneath to make sure there aren’t any brake lines, plumbing, or wiring that would interfere with the crossmember. If something is in the way, MORryde does offer the X-Factor Adapter Kit for Drop-Down Applications # MR43WR, which lets the crossmember run below those obstructions.
From what I can see on the Montana 3901RK Legacy, the drop-down kit usually isn’t needed, but it’s worth a quick check to be safe. As long as everything’s clear, the standard X-Factor will bolt right in and give you the added stiffness and stability you’re after. it is recommended to do a total of 3 crossmembers for the best results.
Any cool trips planned with the Montana for this season?

Floyd G.
1/29/2026
I installed the MORyde X-Factor Crossmember on my 257RSS Bullet as part of a suspension upgrade. They were easy to install ans helped with trailer sway. As an unexpected side benefit one of the frame hangers failed at the weld on one side and the X-Factor Crossmember help hold my suspension in place preventing damage to our trailer and allowing for an easier emergency repair.

Product Page this Question was Asked From
MORryde X-Factor Crossmember for Standard Frame Hangers
- Accessories and Parts
- Trailer Suspension Parts
- Crossmember
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Furrion Variable Speed Chill Cube RV AC w/ Heat Pump & Ceiling Assembly - 18K Btu - Non-Ducted - R32
- Q&A: Availability of Heat Strip or Heat Pump for Furrion Chill Cube RV AC
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications Review
- Shop: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications
- Shop: Valterra RV Plumbing Fitting - 90-Degree Elbow Male Adapter - 1/2" MPT x 1/2" Barb
- Shop: Valterra RV Screen Door Push Bar - 21-5/8" to 28-5/8" Long - Silver and Black
- Shop: Lippert Push Bar for RV Screen Door - 21-1/2" to 28" Long - Silver and Black
- Shop: Screen Shot Automatic Screen Door Closer for RVs - 26" Door Frames
- Shop: Trailer Hitch
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Video: Review of Furrion RV Air Conditioners - Black 18K BTU Variable Speed Chill Cube Ductless - FR87TQ
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Search Results: rv air conditioners
- Shop: Suspension Enhancement
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Brake Controller
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Article: Double-Eye Trailer Suspension System Review
- Search Results: trailer leaf springs
- Search Results: trailer suspension parts
- Q&A: Will a Furrion Chill Cube RV Air Conditioner Fit the Some Cutout as a Dometic AC?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Base Plate for Tow Bar
- Video: Review of Furrion RV Air Conditioners - White 18K BTU Variable Speed Chill Cube Ductless - FR77TQ



Roger1
1/29/2026
Great product. Prevrntd side sway.