Does Replacement Pivot Pin Orientation Matter
Updated 01/19/2026 | Published 12/23/2025
Question:
Does it matter which way the pivot pin is installed
asked by: Jim F
0
Expert Reply:
Hi Jim; there is no front/back up/down requirement for the installation of the Replacement Pivot Pin # 58484. What matters is that you can get the pin in and insert the retaining clip. However, I would match the orientation of the original pin just to be safe.
expert reply by:
Robin H
0
Replacement Pin #30
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Replacement Pivot Pin for Draw-Tite and Reese 16K Fifth Wheel Trailer Hitches
- Accessories and Parts
- 5th Wheel Hitch
- Pins and Clips
- Pivot Parts
- Reese
more information >
Continue Researching
- Q&A: Are There Replacement Jaws for a 16K Reese 5th Wheel Hitch?
- Q&A: What is Diameter of Fastway Zip Trailer Breakaway Switch # FA80-00-2060
- Q&A: Do Pivot Pin Need to Be Removed for Greasing on a Reese Goose Box 5th-Wheel-to-Gooseneck Adapter
- Q&A: How to Adjust Height of Fifth Wheel Hitch
- Q&A: Comparing Hydrastar Electric Over Hydraulic Versus Hydrastar Marine Electric Over Hydraulic Actuator
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: Installation of Slipper Spring with Open Eye End
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Robin H.
1/19/2026
Hey Jim, how did the pivot pin installation go on your fifth wheel hitch? Matching the original orientation usually makes things smoother. Your update could make it easier for others working on the same setup.