Search: motorcycle wheel chock   >  

The best trailer hitch receiver option for your 2023 Audi A4 Allroad comes from Stealth Hitches and they have 2 different kits available depending on what you plan to use the hitch receiver for: - Hidden Rack Receiver #391AUDA417 (for bike rack and…

The Curt Trailer Hitch Receiver, part #C11448 is a confirmed fit for your 2017 A4. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I recommend the Draw-Tite Sportframe Trailer Hitch, part #DT24950 over the Curt hitch because Curt…

It is possible to use the cam-door lock, #383200, horizontally but it would need to be placed up higher than the midway point to reduce the amount of stress on it when the door is closed. Take a look at the picture I have included that shows this…

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

For a Class I ball mount that has a 5 inch rise for your 2015 Honda CR-V you can use #C45024. This particular ball mount can only be used in the rise position. For a compatible 2 inch diameter ball use #C40018.

In order to select the correct amount of rise or drop you would need you will need to take a couple measurements. The goal is to have your trailer sit as level as possible. The first thing you will need to do is park your tow vehicle on level ground…

There are a few things that you can do that will help with the sway and bounce on your 6 x 10 trailer when you are pulling it with your Chevrolet Tahoe. The first thing you can try to do is tow the trailer level. If the tongue on the trailer is high,…

We have a Class IV hitch that fits your 2006 Ford E-450 with the Draw Tite part #41947 but the #14090 would not fit.

For your 2006 Ford F-450 Shuttle Bus you are going to need to use a universal hitch. For this you will need to measure how wide your frame rails are apart on the rear of your bus. Then you will need to know how much drop from the frame rails to the…

The measurement you're referring to for the Erickson Removable Motorcycle Wheel Chock #EM07506 is 8". This wheel chock has overall measurements of 11-3/4" long x 8-1/4" wide x 8-1/2" tall and will fit tires up to 6"…

As long as the tire is not any wider than 6 inches, the Erickson #EM07506 Removable Motorcycle Wheel Chock will work great for you.

I checked with Curt and the Curt Trailer Hitch Receiver part #CU78FR is listed as a fit a 2020 Ford Explorer with kick sensors. That said, the fit with the kick sensors is tight so there are a few things you need to do during installation to ensure…