Torque Specs For 10 Inch Wheel On An Idler Hub With 1/2 Inch Studs
Updated 11/13/2025 | Published 10/17/2025
Products Featured in This Question
Question:
Torque spec of lug nuts
asked by: Ryan
0
Expert Reply:
Hello again, Ryan!
The lug nuts on the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased # AKIHUB-555-35-EZ-K should be tightened to anywhere between 75 and 85 foot pounds when using a 10" wheel, like the # AM3H454 you got. I would split the difference and go to 80 foot pounds. I included a chart that has the torque specs you could ever want as well.
Let me know if there is anything else I can help with! : )
expert reply by:
Lazer S
0
Lug Nut Torque Specs
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: grease
- Q&A: Will The etrailer Hub AKIHUB-545-35-G-EZ-K Fit A 10 Inch Wheel?
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Q&A: Lug Nut Torque for Kenda 205/65-10 Bias Trailer with 10" White Wheel # AM3H430
- Q&A: Trailer Wheel Torque Spec Chart
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Q&A: Does The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers 325-GH-513 Come With The Pintle Lock?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Installation of Emergency Break Away Cable Repair Kit for Dexter Axle A-60 Brake Actuators
- Q&A: What Size Dust Cap Does The Dexter Idler Hub DX77UR Use?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Lazer S.
11/13/2025
Hey Ryan, how did tightening the lug nuts to around 80 foot-pounds work out on your hub and wheel setup? Your feedback could help others dialing in the right torque for their trailers.