Metal Valve Stem For Lionshead Aluminum Trailer Wheel On 2024 Grand Design Imagine 2600RB

Updated 01/09/2026 | Published 09/30/2025

Question:

I need metal valve stems for a 2024 Grand Design 2600Rb. It has 15” lions head aluminum wheels.

asked by: Ronney N

Lionshead Condor Trailer Wheel
(click to enlarge)

Expert Reply:

Hi Ronney!

The Americana Metal, Bolt-In Valve Stem - 1-1/4" Long # AM20906 you found is the correct valve stem for those Lionshead wheels you have on your 2024 Grand Design Imagine 2600RB, which I am pretty sure are the Condor LH75VR.

Are you going with a different tire and need the higher psi, or do you want your TPMS sensors to have more support?

Oh and one other thing. Lionshead is kind of notorious for discontinuing things out of nowhere. That's a bummer as they make nice wheels that people like and it causes issues when people are looking for spares or replacements. The Condor doesn't look to be in danger at the moment, but it wouldn't hurt to grab one if you wanted a spare to match what you already have. These are the Matte Gunmetal Gray finish though, so make sure that is what you currently have if you decide to get one.

expert reply by: Lazer S

Lionshead Condor LH75VR
(click to enlarge)

Ronney N.

10/3/2025

Thanks, I’m looking to put TST TPMS sensors on the stems.

Lazer S.

10/3/2025

@RonneyN Gotcha. The metal valve stems are definitely more suited for that than the rubber ones are. Let me know if there is anything else I can help with! : )

1/7/2026

Hey there. I have these same wheels, Condor, and need metal valve stems for my screw-on TPMS. The stem washer and nut would have to fit into the recessed area of the rim. Can you conform those metal valve stems fit and both the washer and nut fit into the rim? Thank you.

Lazer S.

1/8/2026

@Ox The Americana Metal, Bolt-In Valve Stem - 1-1/4" Long # AM20906 fits both the 0.453" and 0.625" valve stem hole sizes used on trailer wheels, so they are the ones you will want. From what I could find, it looks like the Condor wheel used the 0.453" valve stem hole size. I did also find a few people saying that it was pretty difficult to get the nut tightened town as the hole is pretty small, so if you have a thin walled socket, this is the time to use it. What are your Condor wheels installed on?

1/8/2026

@LazerS I have a 2026 Alliance Delta with 15" tires and the Condor rims. That recessed valve hole looks very small, and I don't have a thin wall socket to fit. Maybe a tire shop would have the proper tool? Otherwise, I'd have to install the TST cap sensors on my rubber valve stems, not something I'd like to do unless there's a way to add support to the valve stem. Maybe a couple of O-rings to prevent the rubber stem from flexing? IDK Thanks.

Lazer S.

1/8/2026

@Ox I assume most would, but I have been wrong once or twice before. Or maybe more than that. Who knows. I would probably call around to a few places and ask if they have them or not. Anyway, there are supports out there and we do have the Wheel Masters Support Brackets for Rubber Valve Stems - Qty 4 # WM8029VS, but they are technically for 16" wheels. I think they could be used on a 15" Condor, but I will admit to never having tested that theory nor have I found anyone that has. They have been used on other 15" wheels though, so I think you could get away with it.