Should I Count Amount of Turns of Lug Nuts When Installing Trailer Wheels
Updated 09/02/2025 | Published 08/12/2025
Question:
Hello, I bought these to go on my bushwhacker 10fb, it has a Dexter 2200 lb torsion flex axle with the 10 inch brake rotors. I have about 1.25inch of exposed stud I get about 9.5 turns with current lug nuts is this appropriate? I get about 10.25 turns when torqued. But old wheels had about 14 turns. The 10 turns gets me about 15 threads Please advise
asked by: Troy P
Expert Reply:
Hey Troy, I wouldn't worry about the amount of turns you get on the wrench when installing your wheels. As long as the torque spec is met that's all that really matters when installing wheels like the # AM53NR that you referenced.
Product Page this Question was Asked From
Aluminum AM03 Series Matte Black Machined Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 5 on 4-1/2 Inch
- Aluminum Wheels
- Americana
more information >
Continue Researching
- Q&A: Tire Pressure Rating For Aluminum Sendel Series T17 Matte Black Mesh Trailer Wheel
- Q&A: Does The Kenda Karrier KR35 ST175/80R13 Tire w/AM03 Wheel Come With A Center Cap?
- Q&A: Which Style Tire Pressure Monitoring System Is Best?
- Q&A: Recommended Hitch for a 2025 Toyota Corolla LE
- Q&A: Is The Kenda Karrier KR35 ST175/80R13 Tire With Aluminum AM03 Wheel KE22XJ Balanced?
- Q&A: Recommended Wheel w/a 5 on 4-1/2" Lug Nut Pattern for a 2015 Coachman Catalina
- Q&A: Do Aluminum AM06 Series Wheels Have Steel Lug Nut Inserts
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
Jameson C.
9/2/2025
Hey Troy, how did everything work out with the wheel installation on your bushwhacker? I'm asking because your experience could help others with similar setups.