Is There A 4" Drop Or Rise Ball Mount With A Sway Control Tab?

Updated 09/02/2025 | Published 08/10/2025

Products Featured in This Question

Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

(175)

$48.74

Replacement Sway Control Tab for Weight Distribution System - Weld On

(32)

$19.98

Curt Dual Length Ball Mount for 2" Hitches - 4-1/2" Rise, 5-3/4" Drop - 7,500 lbs

(166)

$55.31

Curt Ball Mount for 2" Hitches - 2" Rise, 4" Drop - 8-1/4" Long - 7,500 lbs

(3912)

$28.59

Question:

Does Curt make item, Curt Ball Mount w/ Sway Control Tab for 2 Hitches - 3/4 Rise, 2 - 7,500 lbs Part Number: D320, in a 4 version? Or does anyone else?

asked by: Tim W

Expert Reply:

Hi Tim!

I do have a couple options for you, but Curt currently does not offer the Ball Mount w/ Sway Control Tab # D320 with a 4" drop or rise. I couldn't find one from other manufacturers either.

What you will need to use is either the # 3442 and have it welded on, or use the Reese Sway-Control Bracket for 2" Ball Mounts # RP26003 (which is what I would do as it is a lot easier). Either of these could then be paired with the Curt Dual Length Ball Mount for 2" Hitches - 4-1/2" Rise, 5-3/4" Drop - 7,500 lbs # C45240 or the Curt Ball Mount for 2" Hitches - 2" Rise, 4" Drop - 8-1/4" Long - 7,500 lbs # C93KR.

Do you already have the friction sway set up?

expert reply by: Lazer S

Lazer S.

9/2/2025

Hey Tim, Did you decide to go with the Reese Sway-Control Bracket or have the sway control tab welded on? I'm curious to know how it worked out for you, as it could help others looking for a similar setup.