Will Dexter Trailer Wheel Lug Nut 6-70-1 Work On 2017 Big Tex 5XGL-20+3
Updated 09/03/2025 | Published 08/05/2025 >
Question:
Is this an appropriate replacement for FDL R 8inch right hand lug nut on a Big Tex 2017 5XGL-20+3
asked by: Chris
0
Expert Reply:
Hello Chris, thanks for reaching out. The Dexter Trailer Wheel Lug Nut # 6-70-1 is a right hand thread for stud-piloted wheels. The thread size is 1.125"-16. I do not have a way to look up your trailer to know what stud size you have, but as long as you can confirm those specs match what you have you will be good.
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Dexter Trailer Wheel Lug Nut - Outer Budd Type - Right-Hand - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- Outer Budd Nut
- 1-1/2 Inch Outer Diameter
- Zinc-Plated Steel
- Dexter
more information >
Continue Researching
- Q&A: What is the Difference Between ST175/80D13 and ST185/80D13 Tires and Load Range C and D
- Q&A: What is the Best Grease for Trailer Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Weight Capacity of 40ft Gooseneck Trailer Container with Load Range E Tires and 12,000lb Axles
- Q&A: 10 on 8-3/4 Dually Wheels With A 6-1/4" Pilot Hole Needed
- Q&A: Do You Carry a 17-1/2" Wheel With a 10 Lug Bolt Pattern?
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Article: Most Popular Wheel Bearings
- Q&A: What Tire Load Rating Is Needed For Tandem Axle Trailer With 7000 lb Capacity?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams



Jesse M.
9/2/2025
Hey Chris, did you have a chance to check if the specs of the Dexter Trailer Wheel Lug Nut matched your trailer's requirements? I'm asking because your experience could help others with similar trailers.