Will a Kodiak Disc Brake Kit Fit a 2009 Airstream Classic Limited?
Updated 07/31/2025 | Published 07/28/2025
Products Featured in This Question
Question:
Will Kodiak Disc Brake Kit K2R625S work on my 2009 Airstream Classic Limited with Dexter Nev-R-Lube axles?
asked by: Barry F
Expert Reply:
Hey Barry, thanks for reaching out!
The 12" Kodiak Disc Brake Kit # K2R526S will fit your Airstream as long as it has idler hubs with a 6 on 5-1/2" bolt pattern. I don't know what exactly came on your trailer so I wouldn't be able to speak to it directly, but if you can confirm your trailer has something like part # AKIHUB-655-6-EZ-K on it, then this will work.
Let me know what you have and I can make sure you get the right parts!
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Rotor
- 5200 lbs Axle
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Availability Of Stainless-Steel Brake Caliper Mounting Bolts
- Q&A: What Size Bolts Are Needed To Install Caliper Mount Bracket For Kodiak Disc Brake Kit K2HR79E?
- Q&A: What Grade Bolt Comes with Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12
- Q&A: Recommended Brake Assembly Backing Plate Bolt Installation
- Q&A: Is Timken Trailer Hub Grease Seal Better than 10-36
- Q&A: Comparing Maxx and Stainless Steel DeeMaxx Disc Brake Kits
- Q&A: Replacement Caliper and Bracket for the Kodiak Disc Brake Kit item # K2R35D
- Article: Brake Controller Installation: Starting from Scratch
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: The Best Boat Bumpers
Barry F.
7/31/2025
It does have a 6 by 5-1/2 hub. Now my problem is getting the hub off so I can remove the original caliber mounting bracket. I have a 1-7/16 socket and a 25” breaker bar but the nut won’t budge. It’s not a castle nut. I am going to try and use and air impact wrench next. Any other suggestions?