Will Lippert Center Point Fit 2017 Jayco 2035 RKDS

Updated 08/06/2025 | Published 07/13/2025

Products Featured in This Question

Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle

(58)

$1823.43

MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase

(95)

$339.56

MORryde X-Factor Crossmember for Standard Frame Hangers

(397)

$156.59

MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K

(95)

$341.46

Question:

Hello I have a 2017 Jayco 2035 RKDS , would it fit on my trailer ? Any measurements I need to take? Thanks Doug

asked by: Doug S

Expert Reply:

Hey Doug! More than likely the Lippert Center Point # LC1565391 will fit your 2017 Jayco 2035 RKDS. The system is designed for standard center hangers at least 3" wide and measuring at least 2-1/2" from the equalizer hole to the top of the hanger. Hanger spacing must also be 29-1/2" or 30-1/2" apart. As long as you meet these requirements it will work.

Any big trips planned with your Jayco this summer?

expert reply by: Robin H

Lippert Center Point Requirements
(click to enlarge)

Doug S.

7/16/2025

Robin Thanks , will go out a measure at lunch. Trying to decide between this and the MorRyde MR77ZR Not sure which is the better option? Several trips planned. Ontario, Alberta, MB. Montana and Wyoming, wherever the trout are rising. Doug

Robin H.

7/16/2025

@DougS this is a really nice system but there is also more to worry about with the air bags. I would personally get the # MR77ZR so there is no need for adjustment or concern if the bags fail. It is also nice to have the X-factor crossmembers for stability. Is this tandem or triple axle? That kit is for a triple axle trailer with no exact equivalent for the tandem axle since they have the new MORryde AllTrek 4000 # MR29DR which is also for a 35" wheelbase. You can still add the MORryde X-Factor Crossmembers # MR33WR. Sounds like a great time trout fishing!

Doug S.

7/16/2025

@RobinH Its a tandem , i was just using the link as an example. Thanks for the info. May have another question once I do my measuring. Doug