Dimensions Of Replacement Male Quick Connect for WaterPORT Spray Nozzle RG55PR

Question

Question:

I have a 2025 grand design and the standard quick connect for my spray port doesnt seem to work Ive tried 2. Also my factory hose that came w/ the trailer has an o-ring on it. Im wonder if some of the new spray ports might be using this style connection. part number RG55PR, do you have any dimensions I could get to compare to the factory hose I have? Thanks,

asked by: Mike B

0

Expert Reply:

Hey Mike thanks for reaching out. I went out to our warehouse and measured the Replacement Male Quick Connect for WaterPORT Spray Nozzle # RG55PR. It is 1.45" long overall. The threaded end is a standard 1" diameter. The quick connect end is 0.6" in diameter. I edited a picture to help illustrate.

I hope this helps. Were there any other dimensions you were looking for?

expert reply by: Jesse M

0

Replacement Male Quick Connect for WaterPORT Spray Nozzle RG55PR
(click to enlarge)

Mike B.

7/10/2025

The end of the factory hose is more like .45". Grand design did give me the part numbers but they didn't get me much info when searching online. They are below, maybe your stuff will find it. I'm just trying to really get the quick connect side so I can use a regular hose or faucet in the spray port. I've tried 2 different regular quick connects (brass) but they didn't work. I'm assuming these aren't the standard quick connect now as it has that o-ring like this. Trekwood RV parts is the only place I can find the right part number for the spray port but it doesn't describe the quick connect well to know if a regular brass one would work (2 haven't like I said). TDQ881BK-15 (spray port hose) TDQ886BK (spray port) Thanks, Mike B

Jesse M.

7/10/2025

@MikeB I am sorry but I am not seeing any references for those part numbers. They are nowhere in our database and even looking on google that Trekwood place appears to be the only place that has them. I am not familiar with that retailer though so I can't speak for them

Mike B.

7/10/2025

@JesseM Thanks for searching. I might just be out of luck for a while. It seems other grand design owners say the brass one works, so maybe this is new on the 2025's.

Jesse M.

7/10/2025

@MikeB Yea that will probably be your best bet. That or go ahead and replace the whole spray port with something more standard.

Answer 1

Hey John, this is a great question. I asked B and W about whether or not the B and W Fifth Wheel to Gooseneck adapter part #BW73RV would void the frame warranty and they said it has been extensively tested and engineered to provide a smooth, stable…

view full answer...

Answer 2

Thanks for reaching out, Lewis! I recommend replacing your Truma water heater with the Furrion Tankless #FR93FR which also uses a propane connection and is rated for 60,000 Btu so it's a pretty exact replacement when it comes to the specs. We…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Dimensions Of Replacement Male Quick Connect for WaterPORT Spray Nozzle RG55PR

Product Page this Question was Asked From

Continue Researching