Equal-i-zer Weight Distribution EQ95-01-6050 Review Video

Reese doesn't offer a spring bar handle as a replacement part for the #RE44FR weight distribution kit, but luckily the Equal-i-zer #EQ95-01-6050 would work for you.

I am not sure what you mean by too much spring action. If you are wanting to downgrade the system by using lower rated spring bars, you would do so because the current bars are NOT providing enough spring. In any event, my Equal-i-zer representative…

The Replacement Socket for Equal-i-zer 1,000 Lb Weight Distribution Systems part #EQ90-03-1000 is larger than the Replacement Socket for Equal-i-zer 600 Lb Weight Distribution Systems part #EQ90-03-0600 therefore, it cannot be used with the…

We have just what you need. For a replacement Equalizer Spring bar rated for 1,000 lbs tongue weight you would want the part #EQ90-02-1099. This is a single spring bar that's an exact replacement. For a pair instead you'd want #EQ90-01-1099.

The Equal-i-zer Weight Dist Shank part #EQ90-02-4600 should allow you to tow with the tailgate down on your 2017 Ram 3500. I have attached a photo for you of this shank used with a similar system on a similar truck

The item that you are seeing that is included with The Equal-i-zer Weight Distribution System #EQ37100ET is called the snap-up lever. The snap up lever will ease the hookup of the weight distribution hitch by providing an improved leverage when…

The Replacement Snap-Up Lever for Equal-i-zer Weight Distribution Systems #EQ95-01-6050 comes in two halves that thread together. The lower half is 11-1/8 inches and the upper half is 11-1/4 inches. The total length of the lever is 22-3/8 inches.

We have the exact part number you mentioned. The snap-up lever part #FA92-00-6000 is exactly what you are looking for. We put the FA at the beginning of the part number to organize it with the manufacturer Fastway in our systems.

I have a solution for you, however, the Blue Ox Hitch Extender #BX88264 is is designed for hitch-mounted accessories or for flat towing only, not to tow a trailer. Your best option is to use an extra long weight distribution shank, like the Curt…

If you have a 2-1/2 inch hitch installed on your truck then you can use a hitch extender like the Curt part #C45048 which can give you from 24 to 34 inches of extension. You should note that when you use this extender the towing capacity is 6,000…

The correct spring bar lift tool for a Reese weight distribution system is the Snap Up Handle part #RP58162 and not the Curt #C17112 that you referenced.

When used in the drop position and not the rise, the Equal-i-zer Weight Distribution Shank #EQ90-02-4600 should not make any contact with the tail gate or create any issues with limiting the turning radius. I actually found a photo that one of our…