Brake Assemblies for 2002 Cedar Creek
Updated 08/07/2025 | Published 07/07/2025
Products Featured in This Question
Question:
I have a 2002 Cedar Creek fifth wheel. Ready to replace the brakes. I took photos but unsure of what I need
asked by: Craig W
0
Expert Reply:
If you email me you pictures and if you happen to know your axle capacity I can see what you'd need. Are you wanting just the brake assemblies or are you also looking for hubs?
EDIT thanks for the pictures of what you have. Based on that the correct replacement hub/drum you'd need is the part # AKHD-655-6-K and for brake assemblies the part # AKEBRK-7-SA you referenced and you'd be set.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: ladder
- Search Results: rv ladders
- Shop: Replacement Roof Mounting Bracket for Stromberg Carlson Universal Exterior RV Ladder
- Shop: Replacement Standoff for Surco Exterior RV Ladders - Qty 1
- Shop: Replacement Hardware Kit for Stromberg Carlson RV Bunk Ladders
- Shop: Surco RV Exterior Ladder - Aluminum - 84-1/2" Tall - 250 lbs
- Video: Review of Stromberg Carlson Replacement Roof Mounting Bracket Exterior RV Ladder - SC72YR
- Q&A: Does Maxxis ST235/80R16 Radial Tire w/ 16" Eagle Aluminum Wheel Come With Lug Nuts
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Brake Assemblies for 4.4k Axle with Assemblies Marked 5.2k
- Q&A: Does Lippert 12" Electric Brake Assembly ABS Need To Be Programmed Or Paired For Setup?
- Q&A: Do Lippert ABS Electric 12" Brake Assemblies Come Pre-Adjusted, Or Do I Manually Adjust Them First?
- Q&A: Replacement Electric Trailer Brake Assembly for Axletek Hub BD-655
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Q&A: Estimated Installation Time for Romik RAL-S Running Boards
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
Jameson C.
8/7/2025
Hey, how did the installation of the new hub and brake assemblies go for your Cedar Creek fifth wheel? I'm curious to know if everything fit well and worked as expected. Your experience could really help others in a similar situation!