Recommended 8,000 lbs Double Eyed Leaf Spring
Updated 09/02/2025 | Published 06/30/2025
Question:
Needing double eye boat trailer springs ,8000 lbs,single axle,
asked by: Angie F
0
Expert Reply:
Hey Angie. I would be happy to find you the correct spring but I need you to measure yours. If you could measure from the center of one eye to the center of the other with the weight off of that side of the trailer I'll be able to find you the correct spring. I'll also need to know how many leafs your current springs have.
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 5300 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Q&A: Can I Go With A Higher Capacity Spring On My Keystone Trailer?
- Q&A: Looking for Replacement 8k Trailer Axle Leaf Spring
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Where Should the Breakaway Cable and Pin Be Attached on 5th Wheel Hitch Application?
- Q&A: Need New Leaf Springs For 2021 Grand Design Momentum 397
- Q&A: Recommended Double-Eye Leaf Springs For 2007 Fifth Wheel Travel Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Double Eye Leaf Spring For 6,000 Pound Axle on 5th Wheel Trailer
- Article: How to Raise Your Travel Trailer Height
- Article: Most Popular Wheel Bearings
- Article: Slipper Spring Trailer Suspension System Review
Jerred H.
9/2/2025
Hey Angie, did you have a chance to measure the springs on your trailer? I'm here to help you find the right one once you have those details. If you’re still looking for a solution, I’m happy to help.