Looking For Replacement 1/2" - 13 Grade 5 Bolt For Reese RP58393 Pole Tongue Adapter
Updated 09/03/2025 | Published 06/20/2025
Question:
Hi. A few years back I bought your Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW Part Number: RP58393. One of the 4 inch long 3/4 inch bolts snapped and I’m looking for a replacement for that and the corresponding nut. Bolt head says THE F593C. I see an Equalizer Suspension bolt 4 1/2 in long with 3/4 diameter but aren’t sure it would work. The extra half inch of threads is likely fine but is the steel the right kind? Are there other options. Any advice is appreciated. Thank you.
asked by: Toni M
Expert Reply:
Hello Toni, thanks for reaching out. It sounds like you are looking for one of the 1/2" - 13 grade 5 bolts that comes with the # RP58393 pole tongue adapter. I am sorry to say we do not offer this bolt by itself. You might be able to get one directly from Reese, otherwise your best bet would be to check your local hardware store and see if you can find a match. As long as the bolt is 1/2" - 13 grade 5 and it is long enough it will work fine as a replacement.
(click to enlarge)
Product Page this Question was Asked From
Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Pole Tongue Adapters
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Is There a Way to Use Blue Ox Round Bar 2 Pt System with Pole Tongue Trailer
- Q&A: Recommended Equal-I-zer Weight Distribution Hitch for Ice Castle Fish House Trailer
- Q&A: Using a Weight Distribution System on a Boat Trailer With Surge Brakes
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: How to Tell if Trailer is Standard or Underslung for B&W Continuum Weight Distribution System
- Q&A: Recommended Pole-Tongue Adapter for Curt TruTrack Weight Distribution System
- Q&A: Suspension Upgrade for a 2020 Ford Expedition
- Q&A: How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How Much Solar Power Do I Need For My RV?
Jesse M.
9/2/2025
Hi Toni, did you have any luck finding a replacement bolt for your Reese Pole-Tongue Adapter? I'm asking because it could help others who might face the same issue.