Looking To Replace Torsion Axle On Boat Trailer With Timbren Axle-Less Suspension
Updated 09/12/2025 | Published 05/24/2025
Products Featured in This Question
Question:
Looking to replace a torsion axle on my boat trailer with a timbren system. Do you carry one fully assembled with hub and bearings for a 3.5k weight rating Thanks Glenn
asked by: Glenn C
Expert Reply:
Hello Glenn, we sure do!
For the 3,500 lb Timbren Axle-Less Suspension we offer it fully loaded with either idler hubs:
- Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs # A35RS545
Or with electric drum brakes:
- Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K # A35RS545E
Please note these kits do come with all the necessary parts, but they do not come pre-assembled. You will need to mount the backing plates and grease/pack the bearings and hubs. You can see a parts breakdown below. That is how it ships.
Are you needing wheels and tires to go with it?
Hit the reply button below and let me know if there is anything else I can do to help.
(click to enlarge)
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Timbren Axle-Less System with 5 on 5 Bolt Pattern Hubs for Overland Trailer
- Article: Where to Position the Trailer Axle?
- Q&A: Timbren Axle-Less Suspension Compatible with Hubs That Have 6 on 5-1/2 Inch Bolt Pattern
- Q&A: Recommended 3500 lb Axle with Idler Hub Assembly And EZ-Lube Spindles
- Q&A: Dexter Brakes With Parking Brake for Timbren Axle-Less Trailer Suspension
- Q&A: Compatible 6 Lug on 5-1/2 Inch Bolt Pattern Idler Hub and Total Drop of Timbren Axle-Less Suspension
- Q&A: How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
- Q&A: Recommended Suspension Setup For A Lightweight Offroad Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Trailer Maintenance Schedule
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
Jesse M.
9/12/2025
Hey Glenn, did you decide to go with the Timbren Axle-Less Suspension for your boat trailer? I'm curious to know how the installation went for you, as it could help others who are considering a similar upgrade.