Do You Have a Replacement Axle w/ a 93" Hub Face to Hub Face Measurement?
Updated 09/29/2025 | Published 05/07/2025
Products Featured in This Question
Question:
I have a shore lander trailer maybe built in 2000 I am looking for a axle that beam measures 93” and the spring is 78 “
asked by: Agustin
0
Expert Reply:
Thanks for the information! Our etrailer Axle Beam item # e93GR, you were looking at is the closest axle we have to the 93" hub face to hub face measurement at 94". The spring center on this axle is 79", but they can be easily moved over and replaced with the Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter item # TRSS300.
What is the capacity of your current axle?
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79 Inch Spring Center
- 94 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: What Comes Included With The Timbren Silent Ride Suspension for Tandem Axles TSR7000T04?
- Q&A: Meaning of 8 on 6-1/2 Inch Bolt Pattern for Dexter Hub # 8-285-11
- Q&A: Correct Replacement Jack for Kwikee Level Best 3000 Hydraulic Leveling System
- Q&A: Replacement 12 x 2 Inch Electric Brake Assemblies for K-H KAE-96002-02
- Q&A: Bolt Pattern For Hubs on 7,000 lb, 94 Inch Long Axle
- Q&A: Recommended Double-Eye Leaf Spring for 8,000 lbs Axles
- Q&A: Can I Swap My Coleman Mach 10 for the Furrion Chill Cube RV 18,000 Btu?
- Article: How to Measure a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Raise Your Travel Trailer Height
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Trailer Wiring Diagrams
Jerred H.
9/29/2025
Hey, did you find the axle beam and spring seat to be a good fit for your trailer? I'm curious to know if it worked out for you, as it might help others looking for similar solutions.