Heavy Duty Frame Mounted Hitch that Fits 1999 GMC 3500HD Pickup

Question

Question:

Hello, Do you have a frame-mountable heavy duty trailer hitch that will fit a 1999 GMC 3500 HD crew cab pickup?

asked by: John

1

Helpful Expert Reply:

Hey John, yes we have the Curt hitch part # C15325 which is a heavier duty hitch that fits your 1999 GMC 3500HD crew cab. This is a Class V hitch that has a towing capacity of 16,000 lbs.

expert reply by: Jameson C

1

Jameson C.

9/26/2025

Hey John, did the Curt hitch work out for your 1999 GMC 3500HD? I'd love to hear your outcome because it could give others confidence when choosing a heavy-duty hitch.

Answer 1

I have included a picture. In the picture the top drawing is the Draw-Tite hitch #65005. You can see how the receiver sits just below the bumper (and will stick through the optional lower fascia piece, if present). The bottom installed picture is…

view full answer...

Answer 2

We currently have two front mount trailer hitch receivers for your 1996 Chevrolet K1500, the Draw-Tite Front Mount Trailer Hitch Receiver part #65005 and the Curt Front Mount Trailer Hitch Receiver part #31042. They both have a 9,000 lb line pull and…

view full answer...

Answer 3

Hi Donald! The MouseBlocker PROx Plug In Electronic Rodent Deterrent - 110V AC #MB34FR is rated to protect up to 400 square feet. However, it is mostly intended for direct protection and not necessarily a large area. Think vehicles, trailers, and…

view full answer...

Answer 4

The B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25122 that will fit your 1986 Chevy K20 will measure 5.438" from the top of the frame brackets to the top of the receiver. If this is looking like it will not be enough to clear the bottom of…

view full answer...

Answer 5

Hello Joe, thanks for reaching out. Yes, we do have a hitch for the 1993 Chevy C1500 short bed. For that I recommend the following: - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" #C14081 This will fit short bed pickup models with a…

view full answer...

Answer 6

While we do not have a receiver that is specifically designed to work with your 1996 Chevrolet C2500 having the Tommy liftgate, I do have some measurements that may help you determine if one will fit your truck. You will need to measure the height…

view full answer...

Answer 7

Hey Mark! For a rating that high that will fit your motorhome you're going to have to switch to a weld-on hitch. The Curt Class 5 Universal Weld-on Hitch #C99CR is going to be the best option here. This hitch still has a 2" receiver and…

view full answer...

Answer 8

Hello Paul, The B&W Pintle Hook Mounting Plate for 2" Hitches - 9" Shank - 8 Hole - 16,000 lbs #BWPMHD14002 uses a standard 5/8" diameter hitch pin. That’s the normal pin size for a 2" x 2" receiver hitch. I’m not aware…

view full answer...

Answer 9

Hey Mike, The #IR29FR lock kit is not compatible to work with the B&W Pintle Hitch that you have. The pin diameters are different sizes and would not fit. The only kit we have that is confirmed to fit the B&W Pintle Hitch is the InfiniteRule…

view full answer...

Answer 10

Unfortunately you can not Doug. The factory hitch on your 2020 Ford F-150 Lariat is part of the rear step-bumper assembly. It's bolted to your frame and then the step-bumper bolts to the trailer hitch. Removing the factory hitch removes the…

view full answer...

Answer 11

I spoke to my contact at Curt and he informed me that the Curt hitch #C15317 center section measures 31-5/8 inches. The center to center mounting hole width with the flanges attached is 34-7/8 inches. He also informed me that the flanges on the…

view full answer...

Heavy Duty Frame Mounted Hitch that Fits 1999 GMC 3500HD Pickup

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching