bing tracking image
Q & A Icon

Equalizer Upgrade Option For 2020 Prime Time Cursader 29rs  

Updated 05/07/2025 | Published 04/28/2025

Question:

Hello. I have a 2020 Prime Time Cursader 29rs 5th wheel. Im wanting to buy the Moryde equal. And wet bolt kit. Which one do I need? Tandem axle. Thank you!

0

Expert Reply:

Hello Shane, thanks for reaching out. You may be able to use a MORryde equalizer like the # MR54AR, but I would need more info from you in order to say for sure. There is no way to look up your RV online to know your equalizer size and type.

When replacing an equalizer, the replacement must be identical in size to the stock equalizer. There is a small amount of tolerance, like 1/2" or less but not much. Sometimes there is a number cast on your equalizer that we can reference. Your best bet will be to measure your current equalizer. Measure the length across from center hole to center hole. Then measure the height from those holes to the top hole.

Get me those measurements and leave them in a reply below. I am happy to look into it and see what your equalizer upgrade options are.

expert reply by:
0
Jesse M
Shane D. profile picture

Shane D.

5/3/2025

7 3/4 4 3/4 thus measurement is from top bolt center to other bolt center diagonally. Casting number is 81208. Then is a CZ 3. ALSO

Jesse M. profile picture
Etrailer Expert

Jesse M.

5/5/2025

@ShaneD Thanks! The Dexter E-Z Flex Equalizers # K71-655-00 are also 7-3/4" long so this should be a good option for you. Make sure your current equalizer is also 3" tall. We typically don't measure them diagonally but rather the height from center hole to the top hole. Take a look at the picture on the part page for the # K71-655-00. The height is the measurement in green. Yours SHOULD be very close to 3" but please confirm. As long as that matches, the E-Z Flex will fit into your suspension and will work great.
Shane profile picture

Shane

5/5/2025

@JesseM ok ill do it this evening when I get home bout 4:30
Jesse M. profile picture
Etrailer Expert

Jesse M.

5/5/2025

@Shane You know where to find me. Check the length of your shackle links too. Measured center bolt to center bolt. Then I can make sure you get the right shackle kit.
See All (8) Replies to Shane D. ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>