Upgraded Equalizer for 2021 Wildwood X-Lite With EQ310 Equalizer

Updated 04/22/2025 | Published 04/20/2025

Products Featured in This Question

MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K

(62)

$374.99

4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long

(2042)

$68.25

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps

(1915)

$125.09

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps

(1915)

$116.36

Question:

I have a 2021 Wildwood Xlite RV with tandem 3,500 Lippert axles and 33inch wheelbase. I am looking to replace the leaf springs and upgrade the stock equalizer that appears to be imprinted with EQ310 Lippert part 126741. It doesnt appear the MORyde CRE3000 will fit based on the measurements it tells me to take on my RV 3inch clearance from top of tire to floor, etc. The instructions for the MORyde ALLTREK doesnt appear to have these measurements as a requirement. Will this fit my situation? I am confused as the CRE3000 appears to have less travel than the ALLTREK. Thanks in advance, Dan

asked by: Dan

Expert Reply:

Hey Dan! I don't have an exact reason for the measurement restrictions on one vs. the other. It is what MORryde has found works based on the designs. Regardless, the best replacement for an EQ310 like yours is the MORryde ALLTREK 4000 # MR89DR. That particular equalizer isn't as common and has that extra height to it. The ALLTREK 4000 is the closest match (which is the most important factor) and will keep your suspension geometry the same.

While you're at it, I also recommend adding the MORryde Suspension Upgrade Kit for Tandem Axle Trailers. This comes with wet bolts, bronze bushings, and 1/2" thick shackles. These parts are made to last so you don't have to worry about failure. If you currently have 2-1/4" shackle straps (measure center hole to center hole) you need # MR46ZR and for 3-1/8" # MR76ZR.

Do you have your leaf spring measurements? I will need to know the length to help you find replacement leaf springs. The most accurate way to measure is the flat length. Take a look at the help article below which includes a video explaining how to measure. If you can add this in the comments below I will see what is available.

expert reply by: Robin H

MORryde ALLTREK 4000
(click to enlarge)

Dan

4/22/2025

Ya the current leaf springs are 26” and 1,750 pound capacity. If possible I would like to go up a small percentage just so they don’t go flat as quickly.

Robin H.

4/22/2025

@Dan is that spring eye to spring eye? You could use the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long # e22YR. These are rated for 4k axles so that is a 2,000 lb spring capacity. That slight increase won't be enough to impact your ride quality but it will help them last longer.