Can Timbren Axle-Less Kit be Used in Place of Lippert Torsion Axle
Updated 09/26/2025 | Published 04/17/2025
Question:
I am wondering if this Timbren axle will fit the trailer drums/4-bolt brakes/bearings I have. They were pulled off a Lippert torsion axle with 84 1,75inch diameter spindles. If my parts will fit the Timbren spindles, I may order it ...still comparison shopping the Timbren versus straight axle and leaf spring costs. Thanks.
asked by: Jack
Expert Reply:
Hey Jack, thanks for reaching out!
The Timbren Axle-Less Trailer Suspension # TASR1THDS04 will work with your current parts, as long as the bearings and seal from your hubs match what the Timbren spindles take.
The Timbren system fits with L68149 inner and L44649 outer bearings, along with a grease seal that has a 1.719" inner diameter.
Let me know if you have any other questions!
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Where on the Axle Do I Install a Brake Mounting Flange?
- Q&A: Correct Hubs/Drums for Timbren Axle-Less Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs
- Q&A: Recommended Timbren 3,500 Axle-Less System with 4 Inch Lift Spindle for Lance Trailer
- Q&A: Availability Of Replacement Rubber Aeon Springs For Timbren Axle-Less Suspension
- Q&A: Adding Electric Brakes To 2,200lb Dexter Torsion Axles
- Q&A: Replacing Dexter 2K Trailer Axle with 70" Hub Length and 58-1/2" Spring Seat Length
- Q&A: How to Choose Replacement Axle
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Best Boat Trailer Jacks
Jon G.
9/26/2025
Hey Jack, did you find that the Timbren axle worked with your current parts, or are you still comparing it to the straight axle and leaf spring options? I'm curious to know how it turned out for you, as it could help others in a similar situation.