Hub & Drum Assembly 8 lug for a 2007 Kaufman 3 Car Trailer
Updated 01/04/2010 | Published 01/01/2010
Question:
I am looking for above item for a 2007 kaufman 3-car hauler. Not sure which one is the right one for me. Thank you.
asked by: Gibson
Expert Reply:
You will need to remove the existing trailer hub from your axle to be able to find the correct hub and drum assembly replacement for your trailer. The things you will need to know are listed below.
Inner Bearing Part Number
Outer Bearing Part Number
Grease Seal Part Number
Inner Diameter of the Hub if it has Brakes
Width of the Brake Pads on the Brake Assembly
Mounting Pattern for the Brake Assembly
Bolt Pattern for the Wheels on the Trailer
Wheel Stud Diameter for Lug Nuts on the Trailer
If you can provide these dimensions we will be able to match a hub to your trailers axles.
I am including a link to a video of how to remove and reinstall a trailer hub.
Product Page this Question was Asked From
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 7K Axles - 8 on 6-1/2
- Shop: Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2
- Search Results: fitting
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Kodiak Cross Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Dexter Trailer Idler Hub Assembly - 5,200-lb, 6,000-lb and 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 8 on 6-1/2
- Search Results: actuator
- Search Results: hydraulic brake line kit
- Search Results: brake line
- Search Results: rubber brake line
- Search Results: 8~219~13uc3
- Q&A: Installing Hydraulic Disc Brakes on a 5th Wheel Trailer
- Q&A: Electric Over Hydualic Disc Brake Setup for 2020 Grand Design Momentum 376THS
- Q&A: Parts Needed to Install Disc Brakes on a Trailer with Drum Brakes
- Q&A: Difference Between Dexter 8 on 6-1/2 inch Trailer Hubs # 8-231-9UC1-EZ and # 42865-KIT
- Q&A: 7k Trailer Hub with 8 Lug Pattern with 9/16 inch Wheel Studs
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Recommendation for Routing Triple Axle Brake Line Kit
- Video: Let’s Check Out the Dexter Disc Brake Assembly
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-231-9UC1-EZ Review
- Search Results: dexter actuator