bing tracking image
Q & A Icon

Installation of Folding Steel Ramp on Reese Steel Solo Cargo Carrier  

Updated 10/22/2025 | Published 03/26/2025

Question:

Is there an installation video for attaching the PS1040200 to PS1040100? Does the end on the right remove with those 2 bolts on each side? Then is the replacement end built in with the ramp and does it bolt back the same way? I havent ordered the carrier yet so I cant send pic. I am checking it out before I order it to be sure it will work for me and not to have to lift whatever Im loading up over the 3inch ledge once I get it up the ramp. I would like to see a video of the installation. Thank you.

0

Expert Reply:

Hey Ada! We don't have an installation video for adding the # PS1040200 to the # PS1040100. However, you can see what the process is like in the instructions for the # PS10401-10402. The ramp itself is held on with two bolts so removing them would allow you to remove the ramp. The only other part of this is the latch but you could leave the latch on and uninstall/reinstall the ramp as needed. If you need anything else feel free to reach out in the comments below.

expert reply by:
0
Robin H
PS1040200 Ramp Installation
PS1040200 Ramp Installation
(click to enlarge)
Robin H. profile picture

Robin H.

10/22/2025

Hey Ada, did the instructions for the Reese Solo carrier and ramp give you the clarity you needed on how the ramp attaches and removes? Knowing how that process worked for you could help others planning the same setup.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>