What is Stud Length of 3,500 lb Trailer Hub # AKIHUB-545-35-G-K
Updated 10/27/2025 | Published 03/16/2025 >
Question:
What is the stud length on these hubs?
asked by: Mike H
0
Expert Reply:
Hey Mike, the length of the studs on the 3,500 lb trailer hub # AKIHUB-545-35-G-K is 1-5/16 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
- Q&A: Troubleshooting a Dexter Vault Hub that Has Popped Out Slightly
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: What Size of Boat Trailer do I Need?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub


Jameson C.
10/27/2025
Hey Mike, how did the 1-5/16 inch studs on that 3,500 lb hub work out for your setup? Knowing how the fit turned out could help others choosing the same hub.