Replacement Hubs For Kearney 16' Trailer With Dexter 3,500 lb Axles
Updated 11/06/2025 | Published 03/10/2025
Products Featured in This Question
Question:
I have a Kearney 16ft trailer with two Dexter axles 3500lbs. I purchased the K23-086-087-00 brake kits, but I need to know which hub/drums to purchase to complete the project. Please advise. Thank you.
asked by: Roy B
Expert Reply:
Hello Roy, thanks for reaching out. The Dexter 3,500 lb axles use standard bearing sizing, and we do have hub/drums that will work with the # K23-086-087-00 brake kit. I will just need to confirm your hub bolt pattern. The most common is the 5 on 4-1/2" so if this is what you have, I recommend the following:
- Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K
If you have a different bolt pattern just let me know and we should have an option for you.
Leave a reply below with any comments or questions and I will get back to you.
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: 2024 Forest River Wildwood X-Lite 273QBXL
- Q&A: Which Bearing Kit Fits 2019 Flagstaff Microlite 21 FBRS
- Q&A: Replacement Brakes And Drums For A 7k Rated Sloan Kwik Load Trailer
- Q&A: What Hubs and Electric Brakes do I Need for My 1995 Casita Trailer?
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Replacement Suspension on a 2011 Outdoors RV Creekside 18CK With Dual 3500lb Axels
- Q&A: Replacement Brakes And Hubs For A 3,500 Pound Lippert Hub 126003
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure a Trailer Axle
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Jesse M.
10/27/2025
Hey Roy, how did things go with the hub and drum setup for your Kearney trailer? Did the Easy Grease assemblies fit well with your Dexter axles? Your update could make it easier for the next person working on the same project.